Home › General › SETUP › WHEN REPLACING OR REMOVING/INSTALLING PARTS › from 2020.08
RM27T0E _V1 General _091607 SETUP _0433533 WHEN REPLACING OR REMOVING/INSTALLING PARTS F

SETUP  WHEN REPLACING OR REMOVING/INSTALLING PARTS  WORK PROCEDURE  


PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED


Replaced Part or Performed Procedure Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
for 2TR-FE:

ECM


Register VIN DTC P0630 is output (Click here)
for 2TR-FE:
·

Throttle body with motor assembly

·

Cleaning the deposits from the throttle body with motor assembly

·

Engine assembly

·

Cylinder head sub-assembly

·

Camshaft (for intake or exhaust camshaft)

·

Camshaft timing gear assembly

·

Camshaft timing exhaust gear assembly

·

Piston or piston ring

·

Mass air flow meter sub-assembly

·

Fuel injector assembly

·

Fuel pump

·

Air fuel ratio sensor

·

Engine coolant temperature sensor

·

Spark plug

·

Ignition coil assembly

·

Air leaks from intake system

·

Gas leaks from exhaust system

·

Knock control sensor


Inspection after repair Poor idle, engine starting, etc. (Click here)
for 1GR-FE:

ECM


Register VIN DTC P0630 is output (Click here)
for 1GR-FE:
·

Throttle body with motor assembly

·

Cleaning the deposits from the throttle body with motor assembly

·

Engine assembly

·

Cylinder head sub-assembly

·

Camshaft (for intake or exhaust camshaft)

·

Camshaft timing gear assembly

·

Camshaft timing exhaust gear assembly

·

Piston or piston ring

·

Mass air flow meter sub-assembly

·

Fuel injector assembly

·

Fuel pump

·

Air fuel ratio sensor

·

Engine coolant temperature sensor

·

Spark plug

·

Ignition coil assembly

·

Air leaks from intake system

·

Gas leaks from exhaust system

·

Knock control sensor


Inspection after repair Poor idle, engine starting, etc. (Click here)
for 1GR-FE:
·

ECM

·

Throttle body with motor assembly


·

Learning values save

·

Learning values write


Engine starting (Click here)
for 1GD-FTV:

ECM


·

Learning values save

·

Learning values write


Engine starting (Click here)
Register VIN DTC P063051 is output
for 1GD-FTV:

Engine assembly


Clear crank time compensation data Engine starting (Click here)for Initialization
(Click here)for Registration
Crank time compensation data compensation amount is same as before replacement, affecting crank time compensation data (Click here)
for 1GD-FTV, w/ DPF:

ECM


·

Learning values save

·

Learning values write


Engine starting (Click here)
Register VIN DTC P063051 is output
for 1GD-FTV, w/ DPF:

Engine assembly


Clear crank time compensation data Engine starting (Click here)for Initialization
(Click here)for Registration
for 1GD-FTV, w/ DPF:

Crankshaft position sensor plate


Clear crank time compensation data Crank time compensation data compensation amount is same as before replacement, affecting crank time compensation data (Click here)
for 1GD-FTV, w/ DPF:

Air fuel ratio sensor


Clear A/F sensor compensation data -
for 1GD-FTV, w/ DPF:

Exhaust manifold converter sub-assembly


Clear DPF deterioration data -
for 1GD-FTV, w/ Urea SCR System:

ECM


·

Learning values save

·

Learning values write


Engine starting (Click here)
Register VIN DTC P063051 is output
for 1GD-FTV, w/ Urea SCR System:

Engine assembly


Clear crank time compensation data Engine starting (Click here)for Initialization
(Click here)for Registration
for 1GD-FTV, w/ Urea SCR System:

Crankshaft position sensor plate


Clear crank time compensation data Crank time compensation data compensation amount is same as before replacement, affecting crank time compensation data (Click here)
for 1GD-FTV, w/ Urea SCR System:

No. 1 nitrogen oxides sensor


Clear A/F Sensor Compensation data -
for 1GD-FTV, w/ Urea SCR System:

Exhaust manifold converter sub-assembly


Clear DPF deterioration data -
·

Forward recognition camera

·

Windshield glass (Including removal and installation)


Adjust forward recognition camera
·

Dynamic radar cruise control system

·

Front camera system

·

Lane departure alert system

·

Road sign assist system

·

Pre-collision system

·

Automatic high beam system


for One Time Recognition:
(Click here)
or
for Sequential Recognition:
(Click here)
Millimeter wave radar sensor assembly Adjust millimeter wave radar sensor assembly
·

Lane departure alert system

·

Dynamic radar cruise control system

·

Front radar sensor system

·

Pre-collision system


(Click here)
Engine stop and start ECU
1.

Upload the number of starter operations

2.

Reset air conditioning information

3.

Learning air conditioning information

4.

Clear the zero point calibration data

5.

Deceleration sensor zero point calibration

6.

Check the oil pump with solenoid assembly


Stop and start system (Click here)
Air conditioning amplifier assembly
1.

Reset air conditioning information

2.

Learning air conditioning information


Starter assembly
NOTICE:

When the starter assembly is replaced, "ST relay" and "ST No. 2 relay" must be also replaced.


Clear the number of starter operations
Drive plate and ring gear sub-assembly Total number of engine starts reset
Battery
·

Integrated current value initialization

·

Switch battery type


Electromagnetic oil pump with solenoid assembly Check the electromagnetic oil pump with solenoid assembly
Yaw rate and acceleration sensor (Airbag sensor assembly)
1.

Clear the zero point calibration data

2.

Perform zero point calibration of the deceleration sensor


for AC60F, 2TR-FE:
·

Automatic transmission assembly

·

Transmission valve body assembly

·

Any of the shift solenoid valves


Reset memory
·

Large shift shock

·

Engine overruns


(Click here)
for AC60F, 2TR-FE:

Automatic transmission fluid


ATF thermal degradation estimate reset The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly.
for AC60F, 1GR-FE:
·

Automatic transmission assembly

·

Transmission valve body assembly

·

Any of the shift solenoid valves


Reset memory
·

Large shift shock

·

Engine overruns


(Click here)
for AC60F, 1GR-FE:

Automatic transmission fluid


ATF thermal degradation estimate reset The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly.
for AC60F, 1GD-FTV:
·

Automatic transmission assembly

·

Transmission valve body assembly

·

Any of the shift solenoid valves


Reset memory
·

Large shift shock

·

Engine overruns


(Click here)
for AC60F, 1GD-FTV:

Automatic transmission fluid


ATF thermal degradation estimate reset The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly.
Tire pressure warning ECU and receiver
1.

Register transmitter IDs

2.

Initialize tire pressure warning system


·

When DTC detection conditions of "transmitter ID not received" DTC is met, tire pressure warning light blinks for 1 minute, and then illuminates

·

Tire pressure monitoring function


(Click here)for Initialization
(Click here)for Registration
Suspension control ECU Registration Air suspension system (Click here)
·

Brake actuator assembly

·

Acceleration sensor


Calibration Anti-lock brake system (Click here)
·

Skid control ECU (Master cylinder solenoid)

·

Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly)

·

Steering sensor


Calibration Vehicle stability control system (for Hydraulic Brake Booster) (Click here)
·

Skid control ECU (Brake actuator assembly)

·

Yaw rate and acceleration sensor (Airbag sensor assembly)

·

Steering sensor


Calibration Vehicle stability control system (for Vacuum Brake Booster) (Click here)
Telematics transceiver Register vehicle information Emergency call service (Click here)
Mobilephone battery Reset mobilephone battery condition
w/ Multi-terrain Monitor:

Steering sensor


·

Steering angle neutral point

·

Adjust steering angle


Multi-terrain Monitor system (Click here)for Initialization
(Click here)for Calibration
w/ Multi-terrain Monitor:

Parking assist ECU


·

Parking assist ECU initialization

·

Adjust steering angle


w/ Multi-terrain Monitor:

Rear television camera assembly (Including removal and installation)


Rear television camera view adjustment
w/ Multi-terrain Monitor:
·

Front television camera assembly (Including removal and installation)

·

Radiator grille assembly (Including removal and installation)

·

Front bumper assembly (Including removal and installation)


Front television camera view adjustment
w/ Multi-terrain Monitor:
·

Side television camera assembly LH (Including removal and installation)

·

Outer rear view mirror assembly LH (Including removal and installation)

·

Side television camera assembly RH (Including removal and installation)

·

Outer rear view mirror assembly RH (Including removal and installation)


Side television camera view adjustment
w/ Multi-terrain Monitor:
·

Front television camera assembly, radiator grille assembly or front bumper assembly

·

Rear television camera assembly

·

Side television camera assembly LH or outer rear view mirror assembly LH

·

Side television camera assembly RH or outer rear view mirror assembly RH


Television camera view adjustment
HINT:

Replacement or removal and installation of 2 or more parts


w/ Multi-terrain Monitor:

Suspension, tires, etc.


Adjust steering angle
Blind spot monitor sensor Blind spot monitor beam axis inspection
·

DTCs are output

·

Blind spot monitor system


(Click here)
w/ Entry and Start System:
·

Steering lock ECU (steering lock actuator or upper bracket assembly)

·

Certification ECU (smart key ECU assembly)

·

ID code box (immobiliser code ECU)

·

Electrical key transmitter sub-assembly

·

ECM

·

Main body ECU (multiplex network body ECU)


Code registration
·

Engine immobiliser system

·

Engine start

·

Steering lock and unlock

·

Entry and Start System (for Entry Function)

·

Wireless door lock control system


Refer to the Service Bulletin for the registration procedure.
w/o Entry and Start System:
·

Transponder key ECU

·

ECM

·

Key


Code registration
·

Engine immobiliser system

·

Engine start


Refer to the Service Bulletin for the registration procedure.
w/o Entry and Start System:
·

Door control receiver assembly

·

Key


Code registration Wireless door lock control system (w/o Entry and Start System) (Click here)
Fold seat control ECU Position memory initialization Rear power seat system (Click here)
·

Door window regulator assembly

·

Power window regulator motor assembly

·

Door glass

·

Door glass run


Initialize power window control system
·

Auto up and down function

·

Remote control function

·

Key-linked function

·

Wireless transmitter-linked function

·

Key-off operation function

·

Jam protection function

·

Catch protection function


(Click here)
·

Sliding roof ECU (sliding roof drive gear sub-assembly)

·

Sliding roof glass

·

Sliding roof housing


Sliding roof system initialization
·

DTC B2343 output

·

AUTO operation

·

Jam protection function

·

Key-off operation

·

Wireless transmitter-linked operation function

·

Key-linked operation function


(Click here)
No. 1 headlight ECU sub-assembly LH
·

Synchronize the vehicle information

·

Perform No. 1 headlight ECU sub-assembly LH initialization (w/o Air Suspension System)


Headlight leveling function (Click here)
Replacement of the rear height control sensor sub-assembly RH, removal and reinstallation of the rear height control sensor sub-assembly RH, replacement of the suspension, etc. have been performed (w/o Air Suspension System) Perform No. 1 headlight ECU sub-assembly LH initialization