REFRIGERANT SHORTAGE CHECK USING GTS
Connect the GTS to the DLC3.
Engine is started.
Turn the GTS on.
Enter the following menus: Body Electrical / Air Conditioner / Utility / Refrigerant Gas Volume Check.
| Tester Display |
|---|
| Refrigerant Gas Volume Check |
According to the display on the GTS, perform the refrigerant shortage check when the following conditions are met.
| Item | Condition |
|---|---|
| Vehicle Condition | Engine running |
| A/C Switch | On |
| Ambient Temperature*1 | 0 to 49°C (32 to 120°F) |
| Air Conditioning Air Inlet Temperature*2 | 25 to 35°C (77 to 95°F) |
| Set Temperature | MAX COLD |
| Recirculation/fresh Control Switch | Recirculation |
| Air Vent Damper Position | FACE |
| Blower Speed | HI |
When the GTS is operated without the check conditions satisfied, "Refrigerant incorrect" is displayed. Select "Yes" to return to the previous screen.
Refer to the GTS operator's manual for further details.
A message indicating a refrigerant shortage is displayed on the GTS and the air conditioning system turns off if the amount of refrigerant in the system is insufficient.
DTCs are not stored when performing the refrigerant shortage check using the GTS.
*1: This inspection can be judged correctly only if the ambient temperature is within a range of 0 to 49°C (32 to 120°F). Therefore, postpone the test if the temperature is low.
*2: This inspection can be judged correctly only if the air inlet temperature is within a range of 25 to 35°C (77 to 95°F). Therefore, postpone the test if the temperature is out of range.
| Result | Amount of Refrigerant | Corrective Action |
|---|---|---|
| Refrigerant shortage | Insufficient or leakage | 1.
Check for refrigerant leaks using a gas leak detector, and repair if necessary. 2.
Evacuate the air conditioning system and charge it with the appropriate volume of new or purified refrigerant. |
| Refrigerant correct | Correct | - |
| Refrigerant incorrect | Incorrect | Confirm check condition and carry out again |