Home › Engine / Hybrid System › 1GD-FTV (STARTING) › GLOW PLUG CONTROLLER › from 2020.08
RM27T0E _51 Engine / Hybrid System _053695 1GD-FTV STARTING _0260740 GLOW PLUG CONTROLLER A

1GD-FTV STARTING  GLOW PLUG CONTROLLER  INSTALLATION  


PROCEDURE

Hide 28559A 1.INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET

a.

Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 28559 2.INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET

a.

Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 28551 3.INSTALL GLOW PLUG CONTROLLER

a.

Install the glow plug controller with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the 4 connectors and clamp.


Hide 53806 4.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 76622D 5.INSTALL FRONT FENDER MUDGUARD LH

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 7. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART