Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260468 INTAKE AIR TEMPERATURE SENSOR A

1GD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89424D 1.INSTALL INTAKE AIR TEMPERATURE SENSOR

a.

w/o Urea SCR System:

i.

Install a new gasket to the intake air temperature sensor.


ii.

Using a 22 mm deep socket wrench, install the intake air temperature sensor to the intercooler air tube.

Torque:
34.3 N*m (350 kgf*cm, 25 ft.*lbf)


iii.

Connect the intake air temperature sensor connector.



b.

w/ Urea SCR System:

i.

for Intake Air Connector:

Install a new gasket to the intake air temperature sensor.


ii.

for Intake Air Connector:

Using a 17 mm deep socket wrench, install the intake air temperature sensor to the intake air connector.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


iii.

for Intercooler:

Install a new gasket to the intake air temperature sensor.


iv.

for Intercooler:

Using a 17 mm deep socket wrench, install the intake air temperature sensor to the intercooler assembly.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


v.

Connect the intake air temperature sensor connector.



Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY