Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84650
1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
Attach the claw to install the windshield wiper switch assembly.
Connect the 2 connectors.
45286B
2.INSTALL UPPER STEERING COLUMN COVER
Attach the 4 clips and claw to install the upper steering column cover.
45287
3.INSTALL LOWER STEERING COLUMN COVER
Attach the 2 claws to install the lower steering column cover.
for Power Tilt and Power Telescopic:
Install the screw.
Turn the steering wheel to the right and left as necessary to install the 2 screws.
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART