Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261117 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71629 1.REMOVE REAR SEAT CUSHION HINGE COVER LH

B238036

a.

Using a moulding remover, detach the 3 claws and remove the cover.


Hide 71629A 2.REMOVE REAR SEAT CUSHION HINGE COVER RH

B238037

a.

Using a moulding remover, detach the 3 claws and remove the cover.


Hide 3.REMOVE REAR SEAT CUSHION ASSEMBLY RH

B238038

a.

Pull the rear seat cushion band and release the lock.


b.

Remove the 2 bolts and seat cushion.

NOTICE:

Be careful not to damage the vehicle body.



Hide 71940A 4.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the headrest.


Hide 72996A 5.REMOVE REAR SEATBACK COVER

a.

Press the seatback lock release button to release the lock and fold down the seatback.


b.
B237641

Using a screwdriver, detach the 4 claws and remove the cover.

HINT:

Tape the screwdriver tip before use.



Hide 71880A 6.REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

B238017

a.

Using a clip remover, detach the 5 clips.


b.

Detach the 2 claws and remove the carpet.


Hide 7.REMOVE REAR SEATBACK ASSEMBLY RH

B613921C01
1.698,3.396 2.073,3.635 0.375,0.24 12 false *A
*A w/ Seat Belt Warning System
V100135

Bolt
V100136

Connector


a.

Remove the bolt and detach the 2 claws, and then disconnect the outer belt.


b.

w/ Seat Belt Warning System:

i.

Disconnect the connector.



c.

Remove the 2 bolts that secure the seatback to the floor.


d.

Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

NOTICE:

Be careful not to damage the vehicle body.



Hide 71303C 8.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

B238018

a.

Remove the bolt and hinge.


Hide 72677A 9.REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH

B238019

a.

Using a moulding remover, detach the 6 claws.


b.

Move the cover in the direction of the arrow to detach the 2 guides and remove the lever base.


c.
B238021

Detach the cable clamp and disconnect the cable.


Hide 10.REMOVE REAR NO. 2 SEAT ASSEMBLY RH

a.

for Face to Face Seat Type:

Remove the rear No. 2 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)>REMOVAL).


Hide 62331C 12.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

Hide 64910M 13.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 64717A 14.REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

Hide 58574A 16.REMOVE REAR FLOOR REAR MAT SUPPORT PLATE

Hide 57412C 17.REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

Hide 57411D 18.REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

Hide 73233A 20.REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 64725D 21.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 64937A 22.REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

Hide 64712F 23.REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

Hide 64730B 24.REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

Hide 72601 25.REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY RH

B238022

a.

Remove the 2 bolts.


b.

Detach the claw and remove the striker.

NOTICE:

Do not wipe off the grease on the sliding portion of the striker.



Hide 72691B 26.REMOVE REAR SEAT CUSHION LOCK STRIKER

B238023

a.

Remove the 2 bolts and striker.