Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261105 REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:
·

Under either of the following conditions, perform initialization (initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

-

The fold seat control ECU is replaced with a new one.

-

Initialization (initial position reset) of the fold seat control ECU is performed.



·

Under any of the following conditions, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

-

The fold seat control ECU is exchanged with one from another vehicle.

-

The seatback frame and seat leg are inspected.

-

The seat is disassembled and the positions of the seatback and seat cushion change with respect to one another.

-

The seatback frame or seat leg is replaced.

-

The cable is disconnected from the battery while the seatback or seat cushion is operating.




HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 58410R 1.REMOVE DECK BOARD ASSEMBLY

a.

Operate the No. 2 fold seat switch and fold down the 2 seatbacks.


b.
B236495

Remove the 2 bolts.


c.

Detach the 4 clips and remove the deck board.


Hide 58418A 2.REMOVE REAR NO. 4 FLOOR BOARD

a.
B236502C04
2.979,1.448 3.167,1.49 3.167,1.49 2.875,1.729 true 3.198,1.406 3.365,1.573 0.167,0.167 10 false *a
*a Guide


Using a moulding remover, detach the clip and 3 claws.


b.

Detach the 2 guides and remove the floor board.


Hide 58417 3.REMOVE REAR NO. 3 FLOOR BOARD (w/o Rear Air Conditioning System)

a.
B239971C04
0.219,1.125 0.354,1.125 0.354,1.125 0.448,1.25 true 0.76,1.646 1.24,1.646 true 0.052,1.031 0.208,1.177 0.156,0.146 10 false *a 1.26,1.563 1.417,1.708 0.156,0.146 10 false *a
*a Guide


Using a moulding remover, detach the clip and 4 claws.


b.

Detach the 2 guides and remove the floor board.


Hide 58417 4.REMOVE REAR NO. 3 FLOOR BOARD (w/ Rear Air Conditioning System)

a.
B236503C02
0.677,1.406 0.292,1.625 0.292,1.625 0.813,1.531 true 0.115,1.542 0.26,1.688 0.146,0.146 10 false *a
*a Guide


Using a moulding remover, detach the clip and 3 claws.


b.

Detach the 2 guides and remove the floor board.


Hide 58574A 5.REMOVE REAR FLOOR MAT SUPPORT PLATE

a.

Remove the 3 bolts.

B236501C01
1.917,2.083 1.917,2.594 1.917,2.594 2.073,2.594 true 5.469,1.375 5.469,2.594 5.469,2.594 5.625,2.594 true 2.104,2.521 2.271,2.677 0.167,0.156 10 false *a 5.656,2.521 5.823,2.677 0.167,0.156 10 false *a
*a Guide - -



b.

Detach the 4 claws and 2 guides.


c.

Detach the 5 clips and remove the support plate.


Hide 58439D 6.REMOVE DECK BOARD BRACKET REINFORCEMENT

a.
B236496C01
0.5,1.552 0.5,1.135 0.5,1.135 0.688,1.135 true 2.438,0.844 2.969,0.844 2.969,0.844 2.969,0.969 true 0.708,1.052 0.865,1.198 0.156,0.146 10 false *a 2.271,0.76 2.427,0.906 0.156,0.146 10 false *a
*a Hook


Remove the 2 bolts.


b.

Detach the 2 hooks and reinforcement.


Hide 58417D 7.REMOVE NO. 1 DECK BOARD BRACKET LH

a.
B236497

Remove the 2 bolts and bracket.


Hide 8.REMOVE REAR NO. 2 SEAT ASSEMBLY LH

a.

Operate the No. 2 fold seat switch and raise the 2 seatbacks.


b.

Open the cover.

B620979C02
4.448,0.896 4.656,0.896 true 4.448,0.906 5.146,1.781 true 4.177,0.833 4.427,1.021 0.25,0.188 12 true *A 6,1.802 6.313,2 0.313,0.198 10 true *a 4.646,0.938 4.885,1.135 0.24,0.198 10 true *b
*A w/ Seat Belt Warning System - -
*a Connector A *b Connector B



c.

Disconnect the connector A.


d.

w/ Seat Belt Warning System:

i.

Detach the clamp and disconnect the connector B.



e.
B236506

Remove the 2 bolts.


f.
B238648C01
0.542,1.458 0.344,1.458 true 0.479,1.698 0.271,2.49 true 2.885,1.427 2.708,1.552 2.708,1.552 2.563,1.552 true 2.958,1.198 2.75,1.198 true 0.188,2.51 0.344,2.656 0.156,0.146 10 false *b 0.177,1.365 0.344,1.573 0.167,0.208 10 true *a 2.385,1.479 2.542,1.625 0.156,0.146 10 false *b 2.583,1.115 2.75,1.302 0.167,0.188 10 true *a
*a Protective Tape
*b Guide


Using a screwdriver, detach the 2 guides and 6 claws and open the 2 covers.

HINT:

Tape the screwdriver tip before use.



g.
B236494

Remove the 2 bolts.


h.
B236507

Remove the rear No. 2 seat assembly from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

If removing the seat on the RH side with the LH side installed, remove it with the No. 3 rear seat leg cover LH raised as shown in the illustration.