Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE REAR SEAT ASSEMBLY RH
Remove the rear seat assembly RH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side)>REMOVAL).
71845A
2.REMOVE REAR SEAT UPPER RECLINING COVER RH (w/ Seat Belt Warning System)
72525B
3.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (w/ Seat Belt Warning System)
71825B
4.REMOVE REAR SEAT CUSHION MOULDING RH (w/ Seat Belt Warning System)
71829B
5.REMOVE REAR SEAT REAR CUSHION MOULDING LH
72615A
6.REMOVE REAR SEATBACK LOCK STRIKER COVER RH (w/ Seat Belt Warning System)
7.REMOVE SEAT CUSHION COVER WITH PAD (w/ Seat Belt Warning System)
73380C
8.REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
w/ Seat Belt Warning System:
Disconnect the connector and detach the clamp.
Remove the bolt and inner belt.