CHECK DTC (USING GTS)
Check DTC.
Connect the GTS to the DLC3.
Turn the ignition switch to ON and the GTS on.
Enter the following menus: Chassis / KDSS / DTC.
Read DTCs by following the prompts on the GTS screen.
Refer to the GTS operator's manual for further details.
Clear DTC.
After repairing malfunctions, clear the DTCs.
Connect the GTS to the DLC3
Turn the ignition switch to ON and the GTS on.
Enter the following menus: Chassis / KDSS / DTC.
Clear the DTCs by following the prompts on the GTS screen.
Refer to the GTS operator's manual for further details.