Disc cannot be Inserted or is Ejected Right After Insertion
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011from Jan 2012
INSPECTION PROCEDURE
1. CHECK IF A PROPER DISC IS INSERTED
Make sure that the disc is an audio disc or a disc with MP3 or WMA files, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
OK:
Normal disc
HINT:
Translucent or uniquely-shaped discs cannot be played.
CDs and DVDs with adhesive paper labels should not be played.
Commercial audio CDs and DVDs can be played.
CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.
For details on playable CDs and DVDs, refer to the Owner's Manual.
NG
CHANGE DISC
OK
2. CHECK THAT DISC IS INSERTED PROPERLY
Check whether or not the disc is inserted upside down.
OK:
Disc is properly inserted.
NG
INSERT DISC PROPERLY
OK
3. CLEAN DISC AND RECHECK
Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.
OK:
Malfunction disappears.
NOTICE:
Do not use a conventional record cleaner or anti-static preservative.