Disc cannot be Ejected
Circuit diagnosis · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
INSPECTION PROCEDURE
| 1. PRESS EJECT AND CHECK OPERATION |
 |
Press the disc eject switch of the multi-media module receiver assembly for 2 seconds or more and check that the disc is ejected.
- OK:
- Disc is ejected.
|
NG |
 |
|
| REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)
|
|
|
| OK |
|
 |
|
| 2. REPLACE DISC AND RECHECK |
 |
Replace the disc with a known good one and recheck.
- OK:
- Disc is ejected.
|
NG |
 |
|
| REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)
|
|
|
| OK |
|
 |
|
|