2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

CD Sound Skips

Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

INSPECTION PROCEDURE


1. CHECK CD

  1. I100152
    Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD



NG
CHANGE DISC
OK


2. CHECK CD

  1. I100151
    Check the CD.

    OK:
    The CD is clean.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN CD
OK


3. CHECK OPERATION
  1. Check if the problem recurs using a known good CD.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END

4. CHECK RADIO RECEIVER ASSEMBLY
  1. Check the radio receiver assembly installation condition.

    1. Check that the radio receiver assembly is properly installed.

      OK:
      Radio receiver assembly is properly installed.



NG
REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)


← CD cannot be Inserted / Played or CD is Ejected Right After Insertion (from Jan 2012)CD Sound Skips (from Jan 2012) →