2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

CD/DVD Sound Skips

Circuit diagnosis · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

INSPECTION PROCEDURE


1. CHECK DISC

  1. I100152
    Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


2. CHECK DISC

  1. I100151
    Check the disc.

    OK:
    The disc is clean.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN DISC
OK


3. CHECK OPERATION
  1. Check if the same problem occurs again using a known good disc.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END

4. CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY
  1. Check that the multi-media module receiver assembly is properly installed.

    OK:
    Multi-media module receiver assembly is properly installed.



NG
REINSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY PROPERLY
OK

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)


← CD/DVD Sound Skips (Sep 2011 – Dec 2011)Radio Broadcast cannot be Received or Poor Reception (Sep 2011 – Dec 2011) →