CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.
- Clear the DTCs (Click here).
- Switch the ECM from normal mode to check mode using the intelligent tester (Click here).
- Perform a simulation test.
- Check and wiggle the harness(es), connector(s) and terminal(s).
- Clear the DTCs (Click here).