2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK INDICATOR
  1. Turn the ignition switch to ON.

  2. E149000E01
    Check that the CRUISE main indicator light illuminates when the cruise control main switch is turned on, and that the indicator light turns off when the main switch is turned off. If the results are not as specified, inspect the CRUISE main indicator light circuit (Click here).

    HINT:
    While driving with cruise control, the ECM activates AUTO CANCEL of the cruise control system when a malfunction in one of the following occurs: the vehicle speed sensors, stop light switch or other related parts. When AUTO CANCEL is activated, the CRUISE main indicator light outputs the blinking pattern shown in the illustration. At the same time, data of the malfunction is stored as a DTC.

← TERMINALS OF ECU (from Jan 2012)DIAGNOSIS SYSTEM (from Jan 2012) →