Check for DTCs and note any codes that are output.
Clear the DTCs.
Recheck for DTCs by simulating the operation indicated by the DTCs.
HINT:
If the system cannot enter diagnostic mode, inspect the AVC-LAN and all the components that connect to the AVC-LAN for short circuits and repair or replace the malfunctioning part.
Even if the symptom malfunction is not confirmed, check the DTCs. This is because the system stores history DTCs.
Check and clear history DTCs. Then recheck for DTCs.
Result
Result
Proceed to
DTC is output again
A
DTC is not output
B
B.
A
5.DIAGNOSTIC TROUBLE CODE CHART
HINT:
Refer to Diagnostic Trouble Code Chart (Click here).