Route cannot be Calculated
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
INSPECTION PROCEDURE
| 1. CHECK CONFIRM SYMPTOMS |
Confirm the information about the situation when the route calculation did not complete.
Result Result
Proceed to
Route cannot be calculated for any destination.
A
A road in the route is closed or has not been officially opened yet.
B
A ferry crossing is included in the route.
B
The destination is too close.
B
The route cannot be calculated only when driving on a bumpy road.
B
- HINT:
- A route cannot be calculated if the route is unavailable, a ferry crossing is included in the route, the destination is too close or when driving on bumpy roads.
|
|
||||
| A | |
| 2. REPLACE HARD DISK DRIVE |
Replace the hard disk drive (Click here).
Set another destination and check if the system can calculate the route correctly.
- OK:
- Route can be correctly calculated.
|
|
||||
| OK | ||
| ||
