Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011from Jan 2012
1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
2.
REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY
Remove the display and navigation module display (Click here).
3.
REMOVE DISC PLAYER DISC
Remove the 2 screws.
Move the cover in the direction of the arrow shown in the illustration to remove it.
Remove the disc player disc in the direction of the arrow shown in the illustration.