2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Cursor or Map Rotates when Vehicle Stopped

Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011

INSPECTION PROCEDURE


1. CHECK CONDITION

  1. E106418E02
    Check with the customer if the vehicle has been turned by a turntable.

    OK:
    Vehicle has not been turned by turntable.

    Text in Illustration 
    *1
    Example:

    HINT:
    If the vehicle is turned on a turntable with the engine switch on (IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate.



NG
TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Vehicle Position Mark Deviates Greatly (Sep 2011 – Dec 2011)Vehicle Position Mark is not Updated (Sep 2011 – Dec 2011) →