Display Function
Symptom
|
Suspected Area
|
See page
|
Black screen (No image appears on navigation/audio screen).
|
Proceed to "Black Screen"
|
Click here
|
Proceed to "Navigation ECU Power Source Circuit"
|
Click here
|
Display and navigation module display
|
Click here
|
Hard Disk Drive
|
Click here
|
Illumination for panel switch does not come on with tail switch on.
|
Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"
|
Click here
|
Proceed to "Illumination Circuit"
|
Click here
|
Display and navigation module display
|
Click here
|
Display does not dim with tail switch on.
|
Proceed to "Display does not Dim when Light Control Switch is Turned ON"
|
Click here
|
Display and navigation module display
|
Click here
|
Panel switches do not function.
|
Proceed to "Panel Switches do not Function"
|
Click here
|
Proceed to "Steering Pad Switch Circuit"
|
Click here
|
Display and navigation module display
|
Click here
|
Touch panel switch does not function.
|
Proceed to "Touch Panel Switch does not Function"
|
Click here
|
Display and navigation module display
|
Click here
|
Screen is distorted.
|
Proceed to "Navigation ECU Power Source Circuit"
|
Click here
|
Display and navigation module display
|
Click here
|
Screen flicker or color distortion.
|
Proceed to "Screen Flicker or Color Distortion"
|
Click here
|
Display and navigation module display
|
Click here
|
DVD image cannot be displayed on front screen (Parking brake is on).
|
Proceed to "DVD Image Signal Circuit between Radio receiver and Navigation ECU"
|
Click here
|
Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Radio receiver assembly
|
Click here
|
Display and navigation module display
|
Click here
|
Navigation function switches can be operated while vehicle is running.
|
Display and navigation module display
|
Click here
|
Navigation Function
Symptom
|
Suspected Area
|
See page
|
Vehicle position mark deviates.
|
Proceed to "Vehicle Position Mark Deviates Greatly"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Display and navigation module display
|
Click here
|
Cursor or map rotates when vehicle is stopped.
|
Proceed to "Cursor or Map Rotates When Vehicle is Stopped"
|
Click here
|
Display and navigation module display
|
Click here
|
Vehicle position mark is not updated.
|
Proceed to "Vehicle Position Mark is not Updated"
|
Click here
|
Display and navigation module display
|
Click here
|
GPS mark is not displayed.
|
Proceed to "GPS Mark is not Displayed"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Display and navigation module display
|
Click here
|
Voice guidance does not function.
|
Proceed to "Voice Guidance does not Function"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Display and navigation module display
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Radio receiver assembly
|
Click here
|
Map display is incomplete.
|
Hard Disk Drive
|
Click here
|
Display and navigation module display
|
Click here
|
Route cannot be calculated.
|
Proceed to "Route cannot be Calculated"
|
Click here
|
Display and navigation module display
|
Click here
|
Navigation ECU cannot record memory point registration or each item setting.
|
Hard Disk Drive
|
Click here
|
Display and navigation module display
|
Click here
|
A message indicating to wait for a while because of low temperature is displayed.
|
Start engine and increase cabin temperature (near navigation ECU)
|
-
|
Hard Disk Drive
|
Click here
|
Display and navigation module display
|
Click here
|
Map screen turns white or blue. (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally.)
|
Change map scale to smallest (a scale that shows a large area)
|
-
|
Hard Disk Drive
|
Click here
|
Display and navigation module display
|
Click here
|
Voice menu screen is not displayed.
|
Proceed to "Steering Pad Switch Circuit"
|
Click here
|
Display and navigation module display
|
Click here
|
Voice recognition is difficult.
|
Proceed to "Voice Recognition Difficulty"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Navigation ECU"
|
Click here
|
Display and navigation module display
|
Click here
|
Voice is not recognized.
|
Proceed to "Voice is not Recognized"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Navigation ECU"
|
Click here
|
Proceed to "Steering Pad Switch Circuit"
|
Click here
|
Display and navigation module display
|
Click here
|
Customizable parameters cannot be changed. (Customizable parameters can be changed by using the intelligent tester)
|
Display and navigation module display
|
Click here
|
Reverse signal does not change in the vehicle signal check mode screen.
|
Proceed to "Reverse Signal Circuit"
|
Click here
|
Display and navigation module display.
|
Click here
|
"MIC" is not displayed on system check mode screen.
|
Proceed to "Microphone Circuit between Microphone and Navigation ECU"
|
Click here
|
Display and navigation module display
|
Click here
|
"AUX" is not displayed on system check mode screen.
|
Proceed to "Sound Signal Circuit between Radio Receiver Assembly and Stereo Jack Adapter"
|
Click here
|
Radio receiver assembly
|
Click here
|
Display and navigation module display
|
Click here
|
"Bluetooth" Hands-free Function
Symptom
|
Suspected Area
|
See page
|
Cellular phone registration failure, phone directory transfer failure.
|
Proceed to "Cellular Phone Registration Failure, Phone Directory Transfer Failure"
|
Click here
|
Cellular phone cannot send/receive.
|
Proceed to "Cellular Phone cannot Send / Receive"
|
Click here
|
Proceed to "Steering Pad Switch Circuit"
|
Click here
|
Radio receiver assembly
|
Click here
|
Cellular phone cannot make calls in a certain place.
|
Proceed to "Cannot Call in a Certain Place"
|
Click here
|
Other caller's voice cannot be heard, is too quiet, or distorted.
|
Proceed to "The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted"
|
Click here
|
Radio receiver assembly
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Display and navigation module display
|
Click here
|
Other caller cannot hear your voice, or your voice is too quiet or distorted.
|
Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Navigation ECU"
|
Click here
|
Radio receiver assembly
|
Click here
|
Display and navigation module display
|
Click here
|