2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE INTAKE MANIFOLD
(Click here)

2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

A224780
  1. Disconnect the sensor connector.

  1. Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor.

  1. Remove the gasket from the engine coolant temperature sensor.

← REMOVAL (Sep 2011 – Dec 2011)INSPECTION (from Sep 2011) →