DATA LIST / ACTIVE TEST
System information · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus:
Body / (desired system) / Data List.According to the display on the tester, read the Data List.
Main Body Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D Door Courtesy SW
Driver side door courtesy light switch signal / ON or OFF
ON: Driver side door opened
OFF: Driver side door closed
-
D Door Lock Pos SW
Driver side door lock position switch signal / ON or OFF
ON: Driver side door unlocked
OFF: Driver side door locked
-
Door Key SW-Lock
Door key linked lock switch signal / ON or OFF
ON: Driver side door key cylinder turned to lock position
OFF: Driver side door key cylinder not turned
-
D-Door Key SW-UL
Door key linked unlock switch signal / ON or OFF
ON: Driver side door key cylinder turned to unlock position
OFF: Driver side door key cylinder not turned
-
P-Door Courtesy SW
Front passenger side door courtesy light switch signal / ON or OFF
ON: Front passenger side door opened
OFF: Front passenger side door closed
-
P-Door Lock Pos SW
Front passenger side door lock position switch signal / ON or OFF
ON: Front passenger side door unlocked
OFF: Front passenger side door locked
-
Door Lock SW-Lock
Door manual lock switch signal / ON or OFF
ON: Front passenger side door control switch on (lock)
OFF: Front passenger side door control switch off
-
Door Unlock SW-Unlock
Door manual unlock switch signal / ON or OFF
ON: Front passenger side door control switch on (unlock)
OFF: Front passenger side door control switch off
-
RL Door Courtesy SW
Rear LH side door courtesy light switch signal / ON or OFF
ON: Rear LH side door opened
OFF: Rear LH side door closed
-
RL-Door Lock Pos SW
Rear LH side door lock position switch signal / ON or OFF
ON: Rear LH side door unlocked
OFF: Rear LH side door locked
-
RR Door Courtesy SW
Rear RH side door courtesy light switch signal / ON or OFF
ON: Rear RH side door opened
OFF: Rear RH side door closed
-
RR-Door Lock Pos SW
Rear RH side door lock position switch signal / ON or OFF
ON: Rear RH side door unlocked
OFF: Rear RH side door locked
-
Back Door Courtesy SW
Back door courtesy light switch signal / ON or OFF
ON: Back door open
OFF: Back door closed
-
Back Door Open Handle SW
Back door opener handle switch signal / ON or OFF
ON: Back door opener switch pushed
OFF: Back door opener switch not pushed
-
Back Door Lock Pos SW
Back door lock position switch signal / ON or OFF
ON: Back door unlocked
OFF: Back door locked
-
Back Door Open
Back door open status / Permit or Prohibit
Permit: Back door unlocked
Prohibit: Back door locked
-
IG SW
Ignition switch status / ON or OFF
ON: Ignition switch ON
OFF: Ignition switch off
-
ACC SW
Ignition switch status / ON or OFF
ON: Ignition switch ACC
OFF: Ignition switch off
-
Communication Double Locking
Connection status between double door lock ECU and main body ECU / OK or STOP
OK: Connection
STOP: No connection
-
Communication Master SW
Connection status between master switch and main body ECU / OK or STOP
OK: Connection
STOP: No connection
-
Master Switch Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Door Lock Switch Status
Door manual lock switch signal / ON or OFF
ON: Door control switch ON (LOCK)
OFF: Door control switch OFF
-
Door Unlock Switch Status
Door manual unlock switch signal / ON or OFF
ON: Door control switch ON (UNLOCK)
OFF: Door control switch OFF
-
Back Door (w/ Power Back Door System) Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Door Lock Status
Back door lock switch signal / UNLOCK or LOCK
UNLOCK: Back door unlocked
LOCK: Back door locked
-
| ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus:
Body / Main Body / Active Test.According to the display on the tester, perform the Active Test.
Main Body Tester Display
Test Part
Control Range
Diagnostic Note
Door Lock
Operate door lock motor
Lock or Unlock
-
D-Door Unlock
Operate door lock motor
ON or OFF
-
Trunk and Back-Door Open
Operate back door opener
ON or OFF
-
Back Door (w/ Power Back Door System) Tester Display
Test Part
Control Range
Diagnostic Note
Latch Release
Operate back door lock
ON or OFF
-