2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for LHD)

  1. B289654E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    12 (RDC) - 9 (E)
    Seat belt unfastened
    Below 1 Ω
    Seat belt fastened
    1 MΩ or higher

    If the result is not as specified, replace the front seat inner belt assembly LH.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly LH)


INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for RHD)

  1. B289654E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    12 (RDC) - 9 (E)
    Seat belt unfastened
    Below 1 Ω
    Seat belt fastened
    1 MΩ or higher

    If the result is not as specified, replace the front seat inner belt assembly RH.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly RH)

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →