2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

B189679E02
  1. Install the front seat inner belt assembly LH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat.

  1. Connect the connectors and attach the clamps.

    Text in Illustration 
    *1
    Protruding Part


2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

B293042E01
  1. Install the front seat inner belt assembly RH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat.

    Text in Illustration 
    *1
    Protruding Part


3. INSTALL FRONT SEAT INNER LAP BELT SUB-ASSEMBLY LH

  1. B293044E01
    Install the front seat inner lap belt sub-assembly LH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the seat belt to overlap the protruding part of the floor.

    Text in Illustration 
    *1
    Protruding Part


4. INSTALL FRONT SEAT ASSEMBLY LH
(Click here)

5. INSTALL FRONT SEAT ASSEMBLY RH
(Click here)
← INSPECTION (from Sep 2011)PRECAUTION (Sep 2011 – Dec 2011) →