2011-2013 Land Cruiser · Service Manual General

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
  1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Tilt & Telescopic 
    Display
    Default
    Contents
    Setting
    Autoaway / Return function
    ON
    Turn the auto away/return function ON/OFF
    ON/OFF

  2. TOYOTA PARKING ASSIST-SENSOR SYSTEM

    Warning 
    Display
    Default
    Contents
    Setting
    Fr Sensor Onset Range
    Wide
    Sets the buzzer activation range for the front sensors.
    Narrow or Wide
    Rr Sensor Onset Range
    Wide
    Sets the buzzer activation range for the rear sensors.
    Narrow or Wide
    Keep Sense Buzzer
    Avail
    Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.
    Not Avail or Avail
    Fr & Rr Buzzer Freq
    Middle
    Changes the buzzer sounding frequency.
    Low, Middle or High
    Fr & Rr Buzzer Volume
    H
    Changes the buzzer volume setting.
    L, M1, M2, M3 or H
    Sensor 
    Display
    Default
    Contents
    Setting
    Sensor Condition N
    Avail
    Makes the sensors available when the shift lever is in N.
    Not Avail or Avail
    Front Side Dist Sensor
    Long
    Sets the buzzer activation range for the front sensors.
    Short or Long
    Reverse Range Front Sensor
    Fsde
    Changes the operation setting for the vehicle front sensors when the shift lever is in R.
    F, Fs,Fc, Fsde or F Stop
    Non P/R Range Rear Sensor
    R Stop
    Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R.
    R, Rcrn or R Stop
    Display 
    Display
    Default
    Contents
    Setting
    Approach Display OFF
    Avail
    The display when moving away from a previously detected obstacle.
    Not Avail or Avail
    Display Mode
    All
    The display mode setting (when the intuitive parking assist system is normal).
    All or Undisp

  3. POWER DOOR LOCK CONTROL SYSTEM

    Door Lock 
    Display
    Default
    Contents
    Setting
    Unlock Key Twice
    OFF
    Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.
    ON/OFF

  4. WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)

    Wireless Door Lock 
    Display
    Default
    Contents
    Setting
    Hazard Answer Back
    ON
    When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.
    ON/OFF
    Wireless Control
    ON
    Function that turns the wireless door lock function ON or OFF.
    ON/OFF
    Open Door Warning*1
    ON
    If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds.
    ON/OFF
    Panic Alarm Function*2
    ON
    Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds.
    ON/OFF
    Unlock 2 Operation
    OFF
    Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.
    ON/OFF
    Auto Lock Time
    30 s
    Function to change the time until relocking after unlocking with the wireless door lock function.
    30 s/60 s/120 s
    Wireless Auto Lock
    ON
    Function to control the automatic relocking of doors after unlocking with the wireless door lock function.
    ON/OFF
    Wireless Buzzer Resp
    ON*3
    Wireless buzzer response function.
    ON/OFF
    Wireless Buzzer Volume
    Level 7
    This function changes the wireless buzzer volume.
    Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

    HINT:
    *1: Except China
    *2: w/ Panic Switch
    *3: Except Europe and China

  5. WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)

    Wireless Door Lock 
    Display (item)
    Default
    Function
    Setting
    Wireless Control
    ON
    The function that turns the wireless door lock on or off.
    ON or OFF
    Hazard Answer Back
    ON
    When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice.
    ON or OFF
    Open Door Warning
    ON
    If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds.
    ON or OFF
    Auto Lock Time
    30 s
    The function that changes the time until relocking after unlocking the doors with the wireless door lock function.
    30 s, 60 s or 120 s
    Wireless Buzzer Resp
    ON
    This function turns the wireless door lock buzzer response on or off.
    ON or OFF

  6. ENTRY AND START SYSTEM (for Entry Function)

    Entry & Start 
    Display
    Default
    Contents
    Setting
    Ignition Area
    (Entry ignition available area)
    ALL
    Function to choose the available area for the key to start the engine and cancel the steering lock.
    FRONT/ALL*
    Park Wait Time (Waiting time to permit unlocking door after locking)
    2.5s
    Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function.
    0.5s/1.5s/2.5s/5s
    Back Door Opening Operation (Back door open mode when vehicle is locked)
    LONG
    Back door opening the operation.
    LONG/TWICE/OFF
    Warning 
    Display
    Default
    Contents
    Setting
    Passenger Take Key
    ON
    Warn a key is taken out by fellow passengers
    ON/OFF
    Key Low Battery Warning (Warn when key battery becomes weak)
    ON
    Function that warns the driver that the key battery power is low.
    ON/OFF
    Key Out Range Warning
    ON
    Warn Starting E/G when the key is out of range
    ON/OFF

    HINT:
    *: "FRONT" means front, and "ALL" means front, rear 1 and rear 2.

  7. ENTRY UNLOCK MODE SWITCHING FUNCTION

    1. To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.

      1. When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.

      NOTICE:
      After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

      1. All door unlock mode (default):
        When a touch sensor is touched, all doors unlock.
      2. Driver door unlock mode:
        When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.

    2. The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the entry and start system to the entry unlock mode.

    3. B192480E01
      The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

      HINT:
      The function only changes the entry unlock mode of the entry and start system. It does not switch the unlocking of the wireless door lock control.


      1. All door unlock mode:

        B189911E02

        HINT:
        1. *1: except China.
        2. *2: For vehicles with the multi-information display.


      2. Driver door unlock mode:

        B189912E02

        HINT:
        1. *1: except China.
        2. *2: For vehicles with the multi-information display.
        3. The above illustration is for LHD vehicles. For RHD vehicles, the left side and right side are reversed.

  8. KEY CANCEL
    The key cancel operation disables the following functions:

    1. Entry Unlock/Lock
    1. Key Lock-in Prevention
    1. Memory Call
    1. Entry Back Door Open
    1. Warning
    1. Entry Ignition

    1. The operation procedures are as follows:
      Precondition:
      Engine switch off, driver side door closed and unlocked.

      1. Unlock the driver side door once with the unlock switch of the key.
      2. Open the driver door within 5 seconds.
      3. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
      4. Perform close → open twice for the driver door within 30 seconds.
        (Driver door: Open condition → Close → Open → Close → Open)
      5. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
      6. Perform close → open once for the driver door within 30 seconds.
        (Driver door: Open condition → Close → Open)
      7. Close the driver door within 5 seconds.
        When key cancel is activated, the wireless door lock buzzer sounds twice.
        To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.

  9. ENTRY AND START SYSTEM (for Start Function)

    Entry & Start 
    Display
    Default
    Content
    Setting
    Ignition Available Area
    All
    Function to choose the available area for the key to start the engine and cancel the steering lock.
    Front/All

  10. THEFT DETERRENT SYSTEM

    Security: 
    Display
    Default
    Contents
    Setting
    Warning by Horn*1
    ON
    Function that allows vehicle horns and security horn to be used as warning device.
    ON/OFF
    Warning by Glass Broken Sensor*2
    ON
    Function that turns the glass breakage sensor on/off.
    ON/OFF

    HINT:
    1. *1: w/ Security Horn
    2. *2: w/ Glass Breakage Sensor

  11. METER AND GAUGE SYSTEM

    Warning 
    Display (Item)
    Default
    Contents
    Setting
    Driver Side Seatbelt Warning Buzzer
    ON
    To change the seat-belt warning buzzer.
    ON / OFF
    Front Passenger Side Seatbelt Warning Buzzer
    ON
    To change the seat-belt warning buzzer.
    ON / OFF
    Unit Conversion  
    Display (Item)
    Default
    Contents
    Setting
    Units By Region
    Different for each vehicle
    To change the units of the display.
    Km/l JP / Km/l / Mi/g US / Mi/g UK
    Display 
    Display (Item)
    Default
    Contents
    Setting
    Language
    None
    To change the language of the display.
    Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd

  12. SEAT BELT WARNING SYSTEM

    Seat Belt Warning 
    Display
    Default
    Contents
    Setting
    Relevant ECU
    D-Seatbelt Warning Buzzer*1
    ON
    If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer.
    ON or OFF
    Combination meter assembly
    P-Seatbelt Warning Buzzer*1, *2
    ON
    If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer.
    ON or OFF
    Combination meter assembly
    1. *1: w/ Seat Belt Warning Buzzer
    2. *2: w/ Airbag System

  13. WIRELESS DOOR LOCK CONTROL SYSTEM

    Wireless Door Lock 
    Display
    Default
    Contents
    Setting
    Hazard Answer Back
    ON
    When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.
    ON/OFF
    Wireless Control
    ON
    Function that turns the wireless door lock function ON or OFF.
    ON/OFF
    Open Door Warning*1
    ON
    If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.
    ON/OFF
    Panic Alarm Function*2
    ON
    Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds.
    ON/OFF
    Unlock 2 Operation
    OFF
    Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.
    ON/OFF
    Auto Lock Time
    30 s
    Function to change the time until relocking after unlocking with the wireless door lock function.
    30 s/60 s/120 s
    Wireless Auto Lock
    ON
    Function to control the automatic relocking of doors after unlocking with the wireless door lock function.
    ON/OFF
    Wireless Buzzer Resp
    ON*3
    Wireless buzzer response function.
    ON/OFF
    Wireless Buzzer Volume
    Level 7
    This function changes the wireless buzzer volume.
    Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

    HINT:
    1. *1: except China
    2. *2: w/ Panic Switch
    3. *3: Except Europe and China

  14. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

    Air Conditioner 
    Display
    Default
    Contents
    Setting
    Relevant ECU
    Set Temperature Shift
    Normal
    Function to set the temperature shift.
    +2 C/+1 C/Normal/-1 C/-2 C
    Air conditioning amplifier assembly
    Compressor/Air Inlet DEF operation
    Link
    Function to automatically turn the A/C on when the FRONT DEF button is pressed.
    Normal/Link
    Air conditioning amplifier assembly
    Compressor Mode
    Automatic
    Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off.
    Manual/Automatic
    Air conditioning amplifier assembly
    Air Inlet Mode
    Automatic
    Function to automatically change to recirculation mode when the A/C is turned on.
    Manual/Automatic
    Air conditioning amplifier assembly
    Foot/DEF Auto Mode
    ON
    Function to turn the airflow from FOOT/DEF on automatically when auto mode is on.
    ON/OFF
    Air conditioning amplifier assembly
    Foot/DEF Automatic Blow Up Function
    ON
    Function to change the blower level automatically when the defroster is on.
    ON/OFF
    Air conditioning amplifier assembly
    Ambient Temperature Shift
    Normal
    Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
    +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C
    Air conditioning amplifier assembly
    Add Foot Air in FACE Mode
    ON
    When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow.
    ON/OFF
    Air conditioning amplifier assembly

  15. AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)

    Air Conditioner 
    Display
    Default
    Content
    Setting
    Relevant ECU
    Ambient Temperature Shift
    Normal
    Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
    +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C
    Air conditioning amplifier assembly

  16. POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows)

    Power Window 
    Display (Item)
    Default
    Contents
    Setting
    Door Key P/W Up
    OFF
    Function that raises all the power windows when, with the engine switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec.
    ON/OFF
    Door Key P/W Down
    OFF
    Function that lowers all the power windows when, with the engine switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 sec.
    ON/OFF
    P/W Up W/ Transmit
    OFF
    Function that raises all the power windows when, with the engine switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.
    ON/OFF
    P/W Down W/ Transmit
    OFF
    Function that lowers all the power windows when, with the engine switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.
    ON/OFF
    P/W Up W/ Smart
    OFF
    Function that raises all the power windows when, with the engine switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec.
    ON/OFF

  17. SLIDING ROOF SYSTEM

    Slide Roof 
    Display (Item)
    Default
    Contents
    Setting
    Door Key Related Open
    ON
    The function to manually open the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.
    ON/OFF
    Door Key Related Close
    ON
    The function to manually close the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to lock position when the engine switch is off.
    ON/OFF
    Wireless Key Related Open
    ON
    The function to manually open the sliding roof linked with the power window if pressing the transmitter unlock switch for 3 seconds or more when the engine switch is off.
    ON/OFF
    Wireless Key Related Close
    OFF
    The function to manually close the sliding roof linked with the power window if pressing the transmitter lock switch for 3 seconds or more when the engine switch is off.
    ON/OFF
    Door Handle Lock Button
    ON
    The function to manually close the sliding roof linked with the power window if pushing the door lock switch for 3 seconds or more when the engine switch is off and the key is outside vehicle.
    ON/OFF
    Door Key Related Operation
    Slide
    The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.
    Tilt/Slide
    Wireless Key Related Operation
    Slide
    The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by pressing on the transmitter unlock switch for 3 seconds or more when the engine switch is off.
    Tilt/Slide

  18. LIGHTING SYSTEM

    Main Body 
    Display
    Default
    Contents
    Setting
    Lighting Time
    15s
    To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON).
    7.5s/15s/30s
    I/L when ACC OFF
    ON
    Function to light the interior light when the ignition switch is turned from ON to off.
    ON/OFF
    I/L ON W/Door Key Unlock
    ON
    Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.
    ON/OFF
    Room Light when Aprchd
    ON
    Dome light illumination (when approaching vehicle)
    ON/OFF
    Disp Ex ON Sen
    NORMAL
    Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1
    LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
    Disp Ex OFF Sen
    NORMAL
    Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2
    LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
    Sensitivity
    NORMAL
    Function to adjust the ambient light sensitivity of the automatic light control system.*3
    LIGHT2/LIGHT1/NORMAL/DARK1/DARK2

    HINT:
    The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

    *1 
    System Setting
    E224788
    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    HINT:
    When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

    *2 
    System Setting
    E224788
    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    HINT:
    When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

    *3 
    System Setting
    E224788
    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    HINT:
    When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

← VEHICLE LIFT AND SUPPORT LOCATIONS (from Sep 2011)CUSTOMIZE PARAMETERS (from Jan 2012) →