CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Tilt & Telescopic Display
Default
Contents
Setting
Autoaway / Return function
ON
Turn the auto away/return function ON/OFF
ON/OFF
TOYOTA PARKING ASSIST-SENSOR SYSTEM
Warning Display
Default
Contents
Setting
Rr Sensor Onset Range
Wide
Sets the buzzer activation range for the rear sensors.
Narrow or Wide
Keep Sense Buzzer
Avail
Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.
Not Avail or Avail
Fr & Rr Buzzer Volume
H
Changes the buzzer volume setting.
L, M1, M2, M3 or H
Sensor Display
Default
Contents
Setting
Sensor Condition N
Avail
Makes the sensors available when the shift lever is in N.
Not Avail or Avail
Front Side Dist Sensor
Long
Sets the buzzer activation range for the front sensors.
Short or Long
Reverse Range Front Sensor
Fsde
Changes the operation setting for the vehicle front sensors when the shift lever is in R.
F, Fs,Fc, Fsde or F Stop
Non P/R Range Rear Sensor
R Stop
Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R.
R, Rcrn or R Stop
Display Display
Default
Contents
Setting
Approach Display OFF
Avail
The display when moving away from a previously detected obstacle.
Not Avail or Avail
Display Mode
All
The display mode setting (when the intuitive parking assist system is normal).
All or Undisp
POWER DOOR LOCK CONTROL SYSTEM
Door Lock Display
Default
Contents
Setting
Unlock Key Twice
OFF
Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors.
ON/OFF
WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)
Wireless Door Lock Display
Default
Contents
Setting
Hazard Answer Back
ON
When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.
ON/OFF
Wireless Control
ON
Function that turns the wireless door lock function ON or OFF.
ON/OFF
Open Door Warning*1
ON
If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.
ON/OFF
Panic Alarm Function*2
ON
Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds.
ON/OFF
Unlock 2 Operation
OFF
Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.
ON/OFF
Auto Lock Time
30 s
Function to change the time until relocking after unlocking with the wireless door lock function.
30 s/60 s/120 s
Wireless Auto Lock
ON
Function to control the automatic relocking of doors after unlocking with the wireless door lock function.
ON/OFF
Wireless Buzzer Resp
ON*3
Wireless buzzer response function.
ON/OFF
Wireless Buzzer Volume
Level 7
This function changes the wireless buzzer volume.
Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7
- HINT:
- *1: Except China
- *2: w/ Panic Switch
- *3: Except Europe and China
PSD & PBD Operation (w/ Power Back Door System) Display
Default
Contents
Setting
Wireless PBD Operation
0.8 s
1Motion*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
Function to turn on/off the power back door wireless one motion open operation.*
1 Oper or 2 Oper or 0.8 s or OFF
1Motion or 1 Oper or 2 Oper or 0.8 s or OFF*
- HINT:
- *: Except Europe
WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)
Wireless Door Lock Display (item)
Default
Function
Setting
Wireless Control
ON
The function that turns the wireless door lock on or off.
ON or OFF
Hazard Answer Back
ON
When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice.
ON or OFF
Open Door Warning
ON
If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.
ON or OFF
Auto Lock Time
30 s
The function that changes the time until relocking after unlocking the doors with the wireless door lock function.
30 s, 60 s or 120 s
Wireless Buzzer Resp
ON
This function turns the wireless door lock buzzer response on or off.
ON or OFF
ENTRY AND START SYSTEM (for Entry Function)
Entry & Start Display
Default
Contents
Setting
Ignition Area
(Entry ignition available area)
ALL
Function to choose the available area for the key to start the engine and cancel the steering lock.
FRONT/ALL*
Park Wait Time (Waiting time to permit unlocking door after locking)
2.5s
Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function.
0.5s/1.5s/2.5s/5s
Back Door Opening Operation (Back door open mode when vehicle is locked)
LONG
Back door opening the operation.
LONG/TWICE/OFF
Warning Display
Default
Contents
Setting
Passenger Take Key
ON
Warn a key is taken out by fellow passengers
ON/OFF
Key Low Battery Warning (Warn when key battery becomes weak)
ON
Function that warns the driver that the key battery power is low.
ON/OFF
Key Out Range Warning
ON
Warn Starting E/G when the key is out of range
ON/OFF
- HINT:
- *: "FRONT" means front, and "ALL" means front, rear 1 and rear 2.
PSD & PBD Operation (w/ Power Back Door System) Display
Default
Contents
Setting
Wireless PBD Operation
0.8 s
(1Motion)*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
(Function to turn on/off the power back door wireless one motion open operation.)*
1 Oper or 2 Oper or 0.8 s or OFF
(1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*
- HINT:
- *: Except Europe
ENTRY UNLOCK MODE SWITCHING FUNCTION
To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.
- When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.
- NOTICE:
- After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.
- All door unlock mode (default):
When a touch sensor is touched, all doors unlock.
- Driver door unlock mode:
When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.
- When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.
The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the entry and start system to the entry unlock mode.
The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

- HINT:
- The function only changes the entry unlock mode of the entry and start system. It does not switch the unlocking of the wireless door lock control.
- All door unlock mode:


- HINT:
- *1: except China.
- *2: For vehicles with the multi-information display.
- *1: except China.
- Driver door unlock mode:


- HINT:
- *1: except China.
- *2: For vehicles with the multi-information display.
- The above illustration is for LHD vehicles. For RHD vehicles, the left side and right side are reversed.
- *1: except China.
KEY CANCEL
The key cancel operation disables the following functions:- Entry Unlock/Lock
- Key Lock-in Prevention
- Memory Call
- Entry Back Door Open
- Warning
- Entry Ignition
The operation procedures are as follows:
Precondition:
Engine switch off, driver side door closed and unlocked.- Unlock the driver side door once with the unlock switch of the key.
- Open the driver door within 5 seconds.
- Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
- Perform close → open twice for the driver door within 30 seconds.
(Driver door: Open condition → Close → Open → Close → Open)
- Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
- Perform close → open once for the driver door within 30 seconds.
(Driver door: Open condition → Close → Open)
- Close the driver door within 5 seconds.
When key cancel is activated, the wireless door lock buzzer sounds twice.
To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.
- Unlock the driver side door once with the unlock switch of the key.
- Entry Unlock/Lock
ENTRY AND START SYSTEM (for Start Function)
Entry & Start Display
Default
Content
Setting
Ignition Available Area
All
Function to choose the available area for the key to start the engine and cancel the steering lock.
Front/All
THEFT DETERRENT SYSTEM (w/ Entry and Start System)
Security Display
Default
Contents
Setting
Warning by Horn*1
ON
Function that allows vehicle horns and security horn to be used as warning device.
ON/OFF
Warning by Glass Broken Sensor*2
ON
Function that turns the glass breakage sensor on/off.
ON/OFF
- HINT:
- *1: w/ Security Horn
- *2: w/ Glass Breakage Sensor
- *1: w/ Security Horn
THEFT DETERRENT SYSTEM (w/o Entry and Start System)
Security Display
Default
Contents
Setting
Warning by Horn
ON
Function that allows the vehicle horns and security horn to be used as warning devices.
ON/OFF
METER AND GAUGE SYSTEM
Warning Display (Item)
Default
Contents
Setting
Driver Side Seatbelt Warning Buzzer
ON
To change the seat-belt warning buzzer.
ON / OFF
Front Passenger Side Seatbelt Warning Buzzer
ON
To change the seat-belt warning buzzer.
ON / OFF
Unit Conversion Display (Item)
Default
Contents
Setting
Units By Region
Different for each vehicle
To change the units of the display.
Km/l JP / Km/l / Ml/g US / Ml/g UK
Display Display (Item)
Default
Contents
Setting
Eco Drive Indicator Zone
ON
To change the eco driving indicator zone display.
ON / OFF
Language
None
To change the language of the display.
Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd
SEAT BELT WARNING SYSTEM
Seat Belt Warning Display
Default
Contents
Setting
Relevant ECU
D-Seatbelt Warning Buzzer*1
ON
If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer.
ON or OFF
Combination meter assembly
P-Seatbelt Warning Buzzer*1, *2
ON
If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer.
ON or OFF
Combination meter assembly
- *1: w/ Seat Belt Warning Buzzer
- *2: w/ Airbag System
- *1: w/ Seat Belt Warning Buzzer
AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
Air Conditioner Display
Default
Contents
Setting
Relevant ECU
Set Temperature Shift
Normal
Function to set the temperature shift.
+2 C/+1 C/Normal/-1 C/-2 C
Air conditioning amplifier assembly
Compressor/Air Inlet DEF operation
Link
Function to automatically turn the A/C on when the FRONT DEF button is pressed.
Normal/Link
Air conditioning amplifier assembly
Compressor Mode
Automatic
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C switch is off.
Manual/Automatic
Air conditioning amplifier assembly
Air Inlet Mode
Automatic
Function to automatically change to recirculation mode when the A/C is turned on.
Manual/Automatic
Air conditioning amplifier assembly
Foot/DEF Auto Mode
ON
Function to turn the airflow from FOOT/DEF on automatically when auto mode is on.
ON/OFF
Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function
ON
Function to change the blower level automatically when the defroster is on.
ON/OFF
Air conditioning amplifier assembly
Ambient Temperature Shift
Normal
Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
+3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C
Air conditioning amplifier assembly
Add Foot Air in FACE Mode
ON
When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow.
ON/OFF
Air conditioning amplifier assembly
AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)
Air Conditioner Display
Default
Content
Setting
Relevant ECU
Ambient Temperature Shift
Normal
Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
+3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C
Air conditioning amplifier assembly
POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows)
Power Window Display (Item)
Default
Contents
Setting
Door Key P/W Up
OFF
Function that raises all the power windows when, with the engine switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec.
ON/OFF
Door Key P/W Down
OFF
Function that lowers all the power windows when, with the engine switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 sec.
ON/OFF
P/W Up W/ Transmit
OFF
Function that raises all the power windows when, with the engine switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.
ON/OFF
P/W Down W/ Transmit
OFF
Function that lowers all the power windows when, with the engine switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.
ON/OFF
P/W Up W/ Smart
OFF
Function that raises all the power windows when, with the engine switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec.
ON/OFF
SLIDING ROOF SYSTEM
Slide Roof Display (Item)
Default
Contents
Setting
Door Key Related Open
ON
The function to manually open the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.
ON/OFF
Door Key Related Close
ON
The function to manually close the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to lock position when the engine switch is off.
ON/OFF
Wireless Key Related Open
ON
The function to manually open the sliding roof linked with the power window if pressing the transmitter unlock switch for 3 seconds or more when the engine switch is off.
ON/OFF
Wireless Key Related Close
OFF
The function to manually close the sliding roof linked with the power window if pressing the transmitter lock switch for 3 seconds or more when the engine switch is off.
ON/OFF
Door Handle Lock Button
ON
The function to manually close the sliding roof linked with the power window if pushing the door lock switch for 3 seconds or more when the engine switch is off and the key is outside vehicle.
ON/OFF
Door Key Related Operation
Slide
The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.
Tilt/Slide
Wireless Key Related Operation
Slide
The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by pressing on the transmitter unlock switch for 3 seconds or more when the engine switch is off.
Tilt/Slide
POWER BACK DOOR SYSTEM
PSD&PBD operation Display
Default
Contents
Setting
PBD SW Operation
0.8 s
Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 sec.
0.8s or ON
PBD Buzzer
ON
Function that makes the power back door buzzer sound when power back door is operating
ON or OFF
Wireless PBD Operation
0.8 s
(1Motion)*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
(Function to turn on/off the power back door wireless one motion open operation.)*
1 Oper or 2 Oper or 0.8 s or OFF
(1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*
LIGHTING SYSTEM
Main Body Display
Default
Contents
Setting
Lighting Time
15s
To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON).
7.5s/15s/30s
I/L when ACC OFF
ON
Function to light the interior light when the ignition switch is turned from ON to off.
ON/OFF
I/L ON W/Door Key Unlock
ON
Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.
ON/OFF
Room Light when Aprchd
ON
Dome light illumination (when approaching vehicle)
ON/OFF
Disp Ex ON Sen
NORMAL
Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1
LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
Disp Ex OFF Sen
NORMAL
Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2
LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
Sensitivity
NORMAL
Function to adjust the ambient light sensitivity of the automatic light control system.*3
LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
- HINT:
- The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*1 System Setting


Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
- HINT:
- When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.
*2 System Setting


Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
- HINT:
- When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.
*3 System Setting


Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
- HINT:
- When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
| CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display) |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
- Turn the ignition switch to ON.
- Enter the following menus: Setup / Vehicle.
- Select the setting by referring to the table below.
- Turn the ignition switch to ON.
TOYOTA PARKING ASSIST-SENSOR SYSTEM
Warning Display
Default
Contents
Setting
Alert volume
3
Sets the buzzer activation range for the rear center sensors.
1, 2, 3, 4 or 5
Display
On
The display mode setting (when the TOYOTA parking assist-sensor system is normal).
On or Off
Distance
Wide
Sets the buzzer activation range for the rear center sensors.
Narrow or Wide
POWER DOOR LOCK CONTROL SYSTEM
Door lock settings Display
Default
Contents
Setting
Unlock on second key turn
OFF
Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors.
ON/OFF
WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)
Door lock settings Display
Default
Contents
Setting
Remote 2-press unlock
OFF
Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.
ON/OFF
Lock/unlock feedback lights
ON
When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.
ON/OFF
Lock feedback volume
Level 7
This function changes the wireless buzzer volume.
Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7
ENTRY AND START SYSTEM (for Entry Function)
Door lock settings Display
Default
Contents
Setting
Select Doors to Unlock
All Doors
Function that sets which doors are unlocked by the entry unlock function.
All Doors or Driver's Door
Entry and start system
ON
Function that enables or disables the smart key system.
On or Off
AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
Air Conditioner Display
Default
Contents
Setting
Relevant ECU
Auto A/C Mode
On
Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch.
On or Off
Air conditioning amplifier assembly
Efficient Ventilation Mode
On
Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on.
On or Off
Air conditioning amplifier assembly
LIGHTING SYSTEM
Display
Default
Contents
Setting
Interior Lights Off Time
15 s
This function controls the interior lights.
OFF, 7.5 s, 15 s or 30 s
Light Sensor Sensitivity
0
(middle bar)
Adjusts the ambient light sensitivity of the automatic light control system.*
-2, -1, 0, +1 or +2
- HINT:
- The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
* System Setting


Setting
-2
-1
0
+1
+2
- HINT:
- When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.