2011-2013 Land Cruiser · Service Manual Vehicle Interior

FAIL-SAFE CHART

System information · Vehicles built from Jan 2012

Versions by build date: from Sep 2011 from Jan 2012


The pre-crash safety system fail-safe function and details are indicated in the table below.
Cause
Warning Message
Fail-safe Operation
Conditions to Return to Normal Condition
Malfunction exists in part of pre-crash safety system
"CHECK PCS SYSTEM" or
"PCS TEMPORARILY NOT AVAILABLE"
Depending on the malfunctioning part, the pre-crash safety seat belts or the brake assist system may stop operating.*1
Repair the malfunctioning part
Radiator grille or millimeter wave radar sensor is dirty
"PCS TEMPORARILY NOT AVAILABLE"
Depending on the amount of dirt on the radiator grille or millimeter wave radar sensor, the pre-crash safety seat belts or the brake assist system may stop operating.*1
Clean the radiator grille or millimeter wave radar sensor
Pre-crash sensor cannot detect possible crash object because of bad weather, such as snow
"PCS TEMPORARILY NOT AVAILABLE"
Depending on the amount of dirt on the radiator grille, the pre-crash safety seat belts or the brake assist system may stop operating.*1
Sensor can detect an object
Overheating prevention function of seat belt control ECU operates*2
"PCS TEMPORARILY NOT AVAILABLE"
The pre-crash safety seat belts may stop operating.
Temperature of the seat belt goes down, and the seat belt control ECU becomes operative

HINT:
  1. *1: The pre-crash safety seat belts operate only with sudden braking.
  2. *2: The overheating prevention function operates when the seat belt control ECU detects a rise in seat belt control ECU temperature because of excessive seat belt operation.

← FAIL-SAFE CHART (from Sep 2011)DATA LIST / ACTIVE TEST (from Sep 2011) →