B2277 Detecting Vehicle Submersion
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
This DTC is stored when the submersion circuit monitor inside the main body ECU detects that the vehicle has been submerged in water.
DTC Code
|
Detection Condition
|
Trouble Area
|
B2277
|
The submersion circuit monitor inside the main body ECU detects that the vehicle is submerged in water.
|
Main body ECU
|
INSPECTION PROCEDURE
- HINT:
- Before commencing troubleshooting, check if the main body ECU is wet. If it is, replace the main body ECU.
| 1. CHECK WHETHER DTC OUTPUT RECURS |
 |
Clear the DTCs (Click here).
Check whether DTC B2277 is output 30 seconds or more after the engine switch is turned on (IG).
- OK:
- No DTC is output.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|