2011-2013 Land Cruiser · Service Manual Vehicle Interior

B2277 Detecting Vehicle Submersion

Diagnostic trouble codes · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

DESCRIPTION

This DTC is stored when the submersion circuit monitor inside the main body ECU detects that the vehicle has been submerged in water.
DTC Code
Detection Condition
Trouble Area
B2277
The submersion circuit monitor inside the main body ECU detects that the vehicle is submerged in water.
Main body ECU

INSPECTION PROCEDURE

HINT:
Before commencing troubleshooting, check if the main body ECU is wet. If it is, replace the main body ECU.


1. CHECK WHETHER DTC OUTPUT RECURS
  1. Clear the DTCs (Click here).

  1. Check whether DTC B2277 is output 30 seconds or more after the engine switch is turned on (IG).

    OK:
    No DTC is output.



NG
REPLACE MAIN BODY ECU
OK

USE SIMULATION METHOD TO CHECK (Click here)


← B2277 Detecting Vehicle Submersion (Sep 2011 – Dec 2011)B2278 Engine Switch Circuit Malfunction (Sep 2011 – Dec 2011) →