2011-2013 Land Cruiser · Service Manual Steering

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


FUNCTION OF WARNING LIGHT AND MESSAGE

  1. C175639
    If a malfunction occurs during system operation, the master warning light on the combination meter comes on and "Check VGRS System" will be displayed on the multi-information display to inform the driver of the system malfunction.


DTC
  1. Normal mode.

    1. DTCs are stored in the steering control ECU and read using the tester (Click here).

  2. Test mode.

    1. By switching from normal mode to test mode, the steering angle sensor can be inspected (Click here).

      HINT:
      Whether the system is in normal mode or test mode can be checked from the indication on the multi-information display. For details of the indication and how to check, refer to "DTC Check/Clear" (Click here).


CHECK MASTER WARNING LIGHT
  1. Turn the engine switch on (IG).

  2. Check that the master warning light comes on for 2 seconds.

    HINT:
    If the master warning light (VGRS) check result is not normal, proceed to troubleshooting of the warning light circuit.

    Trouble Area
    See Procedure
    Master warning light circuit
    Click here

← TERMINALS OF ECU (from Sep 2011)DIAGNOSIS SYSTEM (from Jan 2012) →