SYSTEM DESCRIPTION
Troubleshooting · Vehicles built from Jan 2012
| ENGINE CONTROL SYSTEM |


| *1 |
ECM |
*2 |
Atmospheric Pressure Sensor (built into ECM) |
| *3 |
Accelerator Pedal Position Sensor |
*4 |
Generator |
| *5 |
Ignition Switch |
*6 |
Starter Signal |
| *7 |
Vehicle Speed Signal |
*8 |
Battery Voltage |
| *9 |
DLC3 |
*10 |
Other Signals |
| *11 |
Stop Light Switch |
*12 |
No. 2 Glow Relay |
| *13 |
No. 1 Glow Relay |
*14 |
EDU 2 Relay |
| *15 |
No. 2 Injector Driver |
*16 |
EDU 1 Relay |
| *17 |
No. 1 Injector Driver |
- |
- |


| *1 |
Fuel Supply Pump Assembly |
*2 |
Suction Control Valve |
| *3 |
Fuel Temperature Sensor |
*4 |
Common Rail Assembly (for Bank 1) |
| *5 |
Fuel Pressure Sensor |
*6 |
Common Rail Assembly (for Bank 2) |
| *7 |
Pressure Discharge Valve |
*8 |
Mass Air Flow Meter |
| *9 |
Intake Air Temperature Sensor (Built Into Mass Air Flow Meter) |
*10 |
Intake Air Temperature Sensor (Turbo) |
| *11 |
Diesel Throttle Body Assembly (for Bank 1) |
*12 |
Diesel Throttle Body Assembly (for Bank 2) |
| *13 |
Manifold Absolute Pressure Sensor |
*14 |
No. 1 EGR Valve |
| *15 |
No. 2 EGR Valve |
*16 |
EGR Cooler |
| *17 |
Glow Plug |
*18 |
Injector Assembly |
| *19 |
Camshaft Position Sensor |
*20 |
Crankshaft Position Sensor |
| *21 |
Engine Coolant Temperature Sensor |
*22 |
DC motor, Nozzle Vane Position Sensor (for Bank 1) |
| *23 |
DC motor, Nozzle Vane Position Sensor (for Bank 2) |
*24 |
Exhaust Gas Temperature Sensor (B1S1) |
| *25 |
Exhaust Gas Temperature Sensor (B2S1) |
*26 |
No. 2 Exhaust Gas Temperature Sensor (B1S2) |
| *27 |
No. 3 Exhaust Gas Temperature Sensor (B2S2) |
*28 |
No. 4 Exhaust Gas Temperature Sensor (B1S3) |
| *29 |
No. 4 Exhaust Gas Temperature Sensor (B2S3) |
*30 |
Air Fuel Ratio Sensor (for Bank 1) |
| *31 |
Air Fuel Ratio Sensor (for Bank 2) |
*32 |
Differential Pressure Sensor Assembly (for Bank 1) |
| *33 |
Differential Pressure Sensor Assembly (for Bank 2) |
*34 |
Exhaust Fuel Addition Injector Assembly (for Bank 1) |
| *35 |
Exhaust Fuel Addition Injector Assembly (for Bank 2) |
*36 |
Monolithic Converter Assembly RH (for Bank 1 CCo catalytic converter) |
| *37 |
Monolithic Converter Assembly LH (for Bank 2 CCo catalytic converter) |
*38 |
Front Exhaust Pipe Assembly (for Bank 1 DPF catalytic converter) |
| *39 |
Front No. 2 Exhaust Pipe Assembly (for Bank 2 DPF catalytic converter) |
- |
- |
| DIESEL PARTICULATE FILTER SYSTEM DESCRIPTION |
The diesel particulate filter System comprehensively regulates engine control (consists of a catalytic system and a fuel injection system) and purifies the particulate matter (PM) of diesel engines. The catalytic system purifies hydrocarbons (HC) and carbon monoxides (CO), and reduces PM with a catalytic converter using the Diesel Particulate Filter (DPF). The fuel injection system adds fuel into the exhaust port using the exhaust fuel addition injector to maintain a proper catalyst temperature for PM forced regeneration.


Text in Illustration *1
ECM
*2
Accelerator Pedal Sensor
*3
Air cleaner
*4
Mass Air Flow Meter
*5
Intercooler
*6
Diesel Throttle Body (for Bank 1)
*7
Intake Air Temperature Sensor (Turbo)
*8
Diesel Throttle Body (for Bank 2)
*9
No. 1 EGR Valve
*10
No. 2 EGR Valve
*11
EGR Cooler
*12
Exhaust Fuel Addition Injector Assembly (for Bank 2)
*13
Exhaust Fuel Addition Injector Assembly (for Bank 1)
*14
Turbocharger (for Bank 1)
*15
Turbocharger (for Bank 2)
*16
Exhaust Gas Temperature Sensor (B2S1)
*17
Exhaust Gas Temperature Sensor (B1S1)
*18
No. 3 Exhaust Gas Temperature Sensor (B2S2)
*19
No. 2 Exhaust Gas Temperature Sensor (B1S2)
*20
No. 4 Exhaust Gas Temperature Sensor (B2S3)
*21
No. 4 Exhaust Gas Temperature Sensor (B1S3)
*22
Differential Pressure Sensor (for Bank 1)
*23
Differential Pressure Sensor (for Bank 2)
*24
Air Fuel Ratio Sensor (for Bank 2)
*25
Air Fuel Ratio Sensor (for Bank 1)
*26
Monolithic Converter Assembly RH (for Bank 1 CCo catalytic converter)
*27
Monolithic Converter Assembly LH (for Bank 2 CCo catalytic converter)
*28
Front Exhaust Pipe Assembly (for Bank 1 DPF catalytic converter)
*29
Front No. 2 Exhaust Pipe Assembly (for Bank 2 DPF catalytic converter)
-
-
DPF components:
Component
Description
Monolithic converter assembly
(CCo catalytic converter)
Reduces HC and CO.
Front exhaust pipe assembly
(DPF catalytic converter)
Reduces PM.
Exhaust Fuel Addition Injector Assembly
Adds fuel into the exhaust port in order to raise catalyst temperature for PM forced regeneration.
Exhaust gas temperature sensor
Used for estimating the DPF catalytic converter temperature and adjusting fuel addition by ECM while PM forced regeneration is performed. Also detects the DPF catalytic converter temperature to prevent the catalytic converter temperature from rising too high.
Differential Pressure Sensor Assembly
Detects the volume of PM deposits and any incorrect vacuum hose arrangement on the DPF catalytic converter.
Air fuel ratio sensor
Used for controlling the air-fuel ratio. By controlling the air-fuel ratio, combustion control and PM forced regeneration are properly regulated.
Diagnostic Trouble Codes (DTCs) table for DPF:
- HINT:
- This table indicates typical DTC combinations for each malfunction occurrence.
*: There may be no DTC output depending on the condition of the malfunction.Trouble Area
Malfunction
DTC No.
Front exhaust pipe assembly
(DPF catalytic converter)
Deteriorated or clogged
P062F, P200C*, P200D*, P200E*, P200F*, P2428*, P2429*, P244B*, P244C*, P244E*, P2458*, P2463*, P2465
Exhaust Fuel Addition Injector Assembly
Stuck open
P20CF, P20D5
Stuck closed
P244C, P244E, P2458*
Low fuel addition volume
P244B*, P244C*, P244E*, P2458*, P2463 P2465,
Open in exhaust fuel addition injector circuit
P20CD, P20D3, P244C, P244E, P2458*
Short in exhaust fuel addition injector circuit
P20CF, P20D5, P20CD, P20D3, P244C, P244E*, P2458*
Open or short in exhaust fuel addition injector circuit
P200C*, P200D*, P200E*, P200F*, P20CF*, P20D5*, P20CD, P20D3, P2428*, P244C*, P244E*, P2458*
Exhaust gas temperature sensor
Open in exhaust gas temperature sensor circuit
P0545, P0546, P0548, P0549, P200C*, P200D*, P200E*, P200F*, P2428*, P2032, P2033, P2035, P2036, P2084, P2086, P242B, P242C, P242D, P2467, P2468, P244C*, P244E*, P2458*, P2469
Short in exhaust gas temperature sensor circuit
P0545, P0546, P0548, P0549, P200C*, P200D*, P200E*, P200F*, P2428*, P2032, P2033, P2035, P2036, P2084, P2086, P242B, P242C, P242D, P2467, P2468, P244C*, P244E*, P2458*, P2469
Exhaust gas temperature sensor
P0545, P0546, P0548, P0549, P200C*, P200D*, P200E*, P200F*, P2428*, P2032, P2033, P2035, P2036, P2084, P2086, P242B, P242C, P242D, P2467, P2468, P244C*, P244E*, P2458*, P2469
Differential Pressure Sensor Assembly
Open in differential pressure sensor circuit
P244C* P2454, P2455, P2458*, P2460, P2461, P2463*
Short in differential pressure sensor circuit
P244C*, P244E*, P2454, P2455, P2458*, P2460, P2461, P2463*
Differential pressure sensor
P244C*, P244E*, P2454, P2455, P2458*, P2460, P2461, P2463*
Differential pressure sensor clogged
P244C*, P244E*, P2453, P2458*, P245F, P2463*
Incorrect vacuum hose arrangement of the differential pressure sensor
P244C*, P244E*, P2453, P2458*, P245F, P2463*
Air fuel ratio sensor
Open or short in air fuel ratio sensor or heater circuit
P0031, P0032, P0051, P0052, P2238, P2239, P2240, P2241, P2252, P2253, P2255, P2256, P244B*, P2463*, P2465
Air fuel ratio sensor
P0031, P0032, P0051, P0052, P2195, P2197, P2238, P2239, P2240, P2241, P2252, P2253, P2255, P2256, P244B*, P2463*, P2465
Exhaust gas leaks
Exhaust gas leaks
P244C*, P2458*
Fuel leaks
Fuel leaks in fuel addition injector
P200C*, P200D*, P200E*, P200F*, P20CF*, P20D5*, P2428*, P244B*, P2458*, P244C*, P244E*, P2463*, P2465
Fuel supply pump assembly
Correct fuel pressure cannot be fed to the exhaust fuel addition injector
P244B*, P244C*, P244E*, P2458*, P2463*, P2465
Diagnostic trouble code description for DPF:
DTC No.
Description
P0031
Open in air fuel ratio sensor heater (for bank 1) control circuit (Low output)
P0032
Short in air fuel ratio sensor heater (for bank 1) circuit (High output)
P0051
Open in air fuel ratio sensor heater (for bank 2) control circuit (Low output)
P0052
Short in air fuel ratio sensor heater (for bank 2) circuit (High output)
P0545
Open or short in exhaust gas temperature sensor circuit (B1S1) (Low output)
P0546
Open or short in exhaust gas temperature sensor circuit (B1S1) (High output)
P0548
Open or short in exhaust gas temperature sensor circuit (B2S1) (Low output)
P0549
Open or short in exhaust gas temperature sensor circuit (B2S1) (High output)
P200C
DPF catalytic converter abnormally high exhaust gas temperature (bank 1 sensor 3)
P200D
DPF catalytic converter abnormally high exhaust gas temperature (bank 2 sensor 3)
P200E
DPF catalytic converter abnormally high exhaust gas temperature (bank 1 sensor 2)
P200F
DPF catalytic converter abnormally high exhaust gas temperature (bank 2 sensor 2)
P2032
Open or short in exhaust gas temperature sensor circuit (B1S2) (Low output)
P2033
Open or short in exhaust gas temperature sensor circuit (B1S2) (High output)
P2035
Open or short in exhaust gas temperature sensor circuit (B2S2) (Low output)
P2036
Open or short in exhaust gas temperature sensor circuit (B2S2) (High output)
P2084
Exhaust Gas Temperature Sensor Circuit Range/Performance (B1S2)
P2086
Exhaust Gas Temperature Sensor Circuit Range/Performance (B2S2)
P20CD
Open in exhaust fuel addition injector (for bank 1) circuit
P20CF
Exhaust fuel addition injector assembly (for bank 1) stuck open
P20D3
Open in exhaust fuel addition injector (for bank 2) circuit
P20D5
Exhaust fuel addition injector assembly (for bank 2) stuck open
P2195
Air fuel ratio sensor (for bank 1) stuck lean
P2197
Air fuel ratio sensor (for bank 2) stuck lean
P2238
Open or short in air fuel ratio sensor (for bank 1) circuit (Low output)
P2239
Open or short in air fuel ratio sensor (for bank 1) circuit (High output)
P2241
Open or short in air fuel ratio sensor (for bank 2) circuit (Low output)
P2242
Open or short in air fuel ratio sensor (for bank 2) circuit (High output)
P2252
Open or short in air fuel ratio sensor (for bank 1) circuit (Low output)
P2253
Open or short in air fuel ratio sensor (for bank 1) circuit (High output)
P2255
Open or short in air fuel ratio sensor (for bank 2) circuit (Low output)
P2256
Open or short in air fuel ratio sensor (for bank 2) circuit (High output)
P2428
DPF catalytic converter abnormally high exhaust gas temperature (bank 1 sensor 1)
P2429
DPF catalytic converter abnormally high exhaust gas temperature (bank 2 sensor 1)
P242B
Exhaust Gas Temperature Sensor Circuit Range / Performance (B1S3)
P242C
Open or short in exhaust gas temperature sensor circuit (B1S3) (Low output)
P242D
Open or short in exhaust gas temperature sensor circuit (B1S3) (High output)
P2467
Exhaust Gas Temperature Sensor Circuit Range/Performance (B2S3)
P2468
Open or short in exhaust gas temperature sensor circuit (B2S3) (Low output)
P2469
Open or short in exhaust gas temperature sensor circuit (B2S3) (High output)
P244B
DPF catalytic converter (for bank 1) excessive differential pressure (High input)
P244C
DPF catalytic converter (for bank 1) insufficient temperature increase
P244E
DPF catalytic converter (for bank 2) insufficient temperature increase
P2453
Differential pressure sensor (for bank 1) is clogged or has incorrect vacuum hose arrangement
P2454
Open or short in differential pressure sensor (for bank 1) circuit (Low output)
P2455
Open or short in differential pressure sensor (for bank 1) circuit (High output)
P2458
Diesel Particulate Filter Regeneration Duration
P245F
Differential pressure sensor (for bank 2) is clogged or has incorrect vacuum hose arrangement
P2460
Open or short in differential pressure sensor (for bank 2) circuit (Low output)
P2461
Open or short in differential pressure sensor (for bank 2) circuit (High output)
P2463
DPF catalytic converter soot deposition
P2465
DPF catalytic converter (for bank 2) excessive differential pressure (High input)
| COMMON RAIL SYSTEM DESCRIPTION |
Common rail system:
The common rail system uses high-pressure fuel for improved fuel economy. This system also provides robust engine power while suppressing engine vibration and noise.
This system stores fuel in the common rail assembly, which has been pressurized and supplied by the fuel supply pump assembly. By storing fuel at high-pressure, the common rail system can provide fuel at stable fuel injection pressures, regardless of engine speed or engine load.
The ECM, using the injector driver, provides an electric current to the piezo actuator in each injector to regulate the fuel injection timing and volume. The ECM also monitors the internal fuel pressure of the common rail assembly using the fuel pressure sensor. The ECM causes the fuel supply pump assembly to supply the fuel necessary to obtain the target fuel pressure.
In addition, this system uses a piezo actuator inside each injector to open and close the fuel passages. Therefore, both fuel injection time and fuel injection volume can be precisely regulated by the ECM.
The common rail system allows a multi-stage fuel injection process. In order to soften combustion shock, this system performs "pilot-injection" prior to the main fuel injection. This helps to reduce engine vibration and noise.

Text in Illustration *1
Sensors
*2
ECM
*3
No. 1 Injector Driver
*4
No. 2 Injector Driver
*5
Common Rail (for Bank 1)
*6
Fuel Pressure Sensor
*7
Fuel Temperature Sensor
*8
Suction Control Valve
*9
Fuel Supply Pump
*10
Exhaust Fuel Addition Injector
*11
Injector Assembly
*12
Pressure Limiter
*13
Common Rail (for Bank 2)
*14
Pressure Discharge Valve
*15
Fuel Filter
*16
Fuel Tank
*17
Fuel Heater
*18
High Pressure Fuel
*19
Return Fuel
*20
Suction Fuel
- HINT:
- If there is a problem with a fuel return pipe, as bleeding air from the fuel system may not be able to be performed properly in certain instances, such as after replacing an injector assembly, etc., the engine startability may deteriorate.
Common rail system components:
Component
Description
Common rail assembly
Stores high-pressure fuel produced by fuel supply pump assembly
Fuel supply pump assembly
- Operated by crankshaft via gear
- Supplies high-pressure fuel to common rail assembly
Injector assembly
Injects fuel to combustion chamber based on signals from ECM
Fuel pressure sensor
Monitors internal fuel pressure of common rail and sends signals to ECM
Pressure discharge valve
Based on signals from ECM, opens valve when sudden deceleration occurs, or when engine switch is off to prevent fuel pressure from becoming too high.
Suction control valve
Based on signals from ECM, adjusts fuel volume supplied to common rail and regulates internal fuel pressure
Check valve
Keeps pressure that discharges from injector
- Operated by crankshaft via gear
Diagnostic trouble code (DTC) table for the common rail system:
- HINT:
- This table indicates typical DTC combinations for each malfunction occurrence.
*: There may be no DTC output depending on the condition of the malfunction.Trouble Area
Malfunction
DTC No.
Injector assembly
Open or short in injector circuit
P0093*, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P062D, P062E
Stuck open
P0093
Stuck closed
P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308
Fuel pressure sensor
Open or short in fuel pressure sensor circuit or pressure sensor output fixed
P0087, P0190, P0192, P0193
Pressure discharge valve
Open or short in pressure discharge valve circuit
P0088*, P0093*, P1229*, P1271, P1272
Stuck open
P0093
Stuck closed
P0088*, P1272
Suction control valve
Open or short in suction control valve circuit
P0627, P1229, P0088*
Stuck open
P0088*, P1229
Injector driver
Faulty injector driver
P0093*, P0201*, P0202*, P0203*, P0204*, P0205*, P0206*, P0207*, P0208*, P062D*, P062E*, P1271*, P1272*
Common rail system (Fuel system)
Fuel leaks in high-pressure area
P0093
Diagnostic trouble code description for the common rail system:
DTC No.
Description
P0087
Fuel pressure sensor output does not change
P0088
Internal fuel pressure too high (250000 kPa [2550 kgf/cm2, 36250 psi] or more)
P0093
Fuel leaks in high-pressure areas
P0190
Open or short in fuel pressure sensor circuit (output voltage is too low or too high)
P0192
Open or short in fuel pressure sensor circuit (output voltage is too low)
P0193
Open or short in fuel pressure sensor circuit (output voltage is too high)
P0201 to P0208
Open or short in No. 1 to No. 8 injector circuit
P0301 to P0308
Cylinder 1 to 8 misfire detected
P0627
Open or short in suction control valve circuit
P062D
Open or short in No. 1 injector driver
P062E
Open or short in No. 2 injector driver
P1229
Fuel over-feed
P1271
Open or short in pressure discharge valve circuit
P1272
Pressure discharge valve stuck close
| FUEL SUPPLY PUMP OPERATION SYSTEM DESCRIPTION |


| SUCTION CONTROL VALVE OPERATION SYSTEM DESCRIPTION |
- HINT:
- The ECM controls the suction control valve operation to regulate the fuel volume that is produced by the fuel supply pump assembly for the common rail. This control is performed to regulate the internal fuel pressure of the common rail to the target injection pressure.
Small opening of the suction control valve:
When the opening of the suction control valve is small, the volume of supplied fuel is small.
The suction volume becomes small due to the narrow path despite the plunger stroke being full. The difference between the geometrical volume and suction volume creates a vacuum.
Pump output will start when the fuel pressure at (A) becomes higher than the common rail pressure (B).


Large opening of the suction control valve:
When the opening of the suction control valve is large, the volume of supplied fuel is large.
If the plunger stroke is full, the suction volume becomes large because of the wide path.
Pump output will start when the fuel pressure at (A) becomes higher than the common rail pressure (B).

