2011-2013 Land Cruiser · Service Manual Steering

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Sep 2011


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Tilt & Telescopic / DTC.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Tilt & Telescopic / DTC.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Sep 2011)FREEZE FRAME DATA (from Sep 2011) →