FREEZE FRAME DATA
Troubleshooting · Vehicles built from Sep 2011
| FREEZE FRAME DATA |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and check the freeze frame data by following the prompts on the intelligent tester screen.
Tilt & Telescopic Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Tilt Position
Current tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco Position
Current telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Return Position
Memorized tilt return position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco Return Position
Memorized telescopic return position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Up Limit
Uppermost tilt position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Tilt Up Limit Position
Uppermost tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Down Limit
Lowermost tilt position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Tilt Down Limit Position
Lowermost tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco Short Limit
Shortest telescopic position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Telesco Short Limit Pos
Shortest telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco Long Limit
Longest telescopic position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Telesco Long Limit Pos
Longest telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Up SW (CAN)
Input state of tilt up by manual switch/ON or OFF
ON: Tilt up is activated by manual switch
OFF: Tilt up is not activated by manual switch
-
Tilt Down SW (CAN)
Input state of tilt down by manual switch/ON or OFF
ON: Tilt down is activated by manual switch
OFF: Tilt down is not activated by manual switch
-
Telesco Short SW (CAN)
Input state of telescopic short by manual switch/ON or OFF
ON: Telescopic short is activated by manual switch
OFF: Telescopic short is not activated by manual switch
-
Telesco Long SW (CAN)
Input state of telescopic long by manual switch/ON or OFF
ON: Telescopic long is activated by manual switch
OFF: Telescopic long is not activated by manual switch
-
S/B Mem 1
Tilt and telescopic memory position 1/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
S/B Mem 2
Tilt and telescopic memory position 2/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
S/B Mem 3
Tilt and telescopic memory position 3/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
T&T Autoaway Function
Auto away/return function/ON or OFF
ON: Auto away and return function is allowed
OFF: Auto away and return function is prohibited
-
Power Source Voltage
Voltage data of power supply/min.: 0 V, max.: 20 V
Actual power supply voltage
11 to 14 V
-
Freeze Speed Info
Vehicle speed data/min: 0 km/h (0 mph), max.: 255 km/h (158 mph)
Actual vehicle speed
-
IG Switch (CAN)
Communication state of engine switch/ON or OFF
ON: Communication is normal
OFF: Communication is interrupted
-
Key Code Confirm (CAN)
Communication state of key code confirmation signal/ON or OFF
ON: Communication is normal
OFF: Communication is interrupted
-
Driver Seat Buckle SW
Driver side buckle switch signal / Set, Unset or Unknown
-
-
The Number of DTCs
Number of diagnostic trouble codes/min.: 0, max.: 255
Actual number of diagnostic trouble codes
-