CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Sep 2011
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the tester on.
Enter the following menus: Body / Tilt & Telescopic / Utility / Customize.
Select the setting by referring to the table below.
Tilt & Telescopic Display
Default
Contents
Setting
Autoaway/Return function
ON
Turn the auto away/return function ON/OFF
ON/OFF