When a transmitter switch is pushed, the following occurs: 1) the door control receiver receives the transmitter signal; 2) the door control receiver sends a signal to the main body ECU; 3) the main body ECU sends the operation permission signal to the power window regulator motors; and 4) the power window motors are activated.
When the driver door key cylinder (key linked switch) is turned, the following occurs: 1) the door lock motor receives the signal; 2) the door lock motor sends the signal to the main body ECU; 3) the main body ECU sends the signal to the power window regulator motors; and 4) the power window motors are activated.
INSPECTION PROCEDURE
1. CHECK BASIC FUNCTION (WIRELESS DOOR LOCK CONTROL SYSTEM AND POWER DOOR LOCK CONTROL SYSTEM)
Check that all the doors can be locked and unlocked with the wireless transmitter and the driver side door key cylinder (key linked switch).
Result
Result
Proceed to
All doors can be locked and unlocked with transmitter and driver side door key cylinder
A
All doors cannot be locked and unlocked with transmitter
B
All doors cannot be locked and unlocked with driver side door key cylinder
C
B
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Click here)