Jam Protection Function does not Operate
Circuit diagnosis · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
- This symptom may occur to all door windows.
The jam protection function operates within a specified range during the manual up or auto up operation.
INSPECTION PROCEDURE
| 1. PERFORM INITIALIZATION |
 |
Initialize the power window regulator motor (Click here).
Check if the power window auto up/down function operates (Click here).
- OK:
- Auto up/down function operates.
|
NG |
 |
|
| END (PROBLEM DUE TO INITIALIZATION FAILURE) |
|
|
| OK |
|
 |
|
| 2. CHECK JAM PROTECTION FUNCTION OPERATING RANGE |
 |
Check if the jam protection function operates for applicable power window.
- HINT:
- The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.157 in.) below that.
- OK:
- Jam protection function operates.
Result
Result
|
Proceed to
|
OK
|
A
|
NG (for LHD)
|
B
|
NG (for RHD)
|
C
|
|
B |
 |
|
| REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (Click here)
|
|
|
|
C |
 |
|
| REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (Click here)
|
|
|
| A |
|
 |
|
|