2011-2013 Land Cruiser · Service Manual Steering

C1593/53 Actuator Standard Position Malfunction

Diagnostic trouble codes · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

DESCRIPTION

If the steering control ECU detects a steering actuator standard position error, it will store DTC C1593/53.
DTC Code
DTC Detection Condition
Trouble Area
C1593/53
The steering control ECU detects a steering actuator standard position error.
Steering actuator

INSPECTION PROCEDURE


1. CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    Result 
    Result
    Proceed to
    C1593/53 is not output
    OK
    C1593/53 is output
    NG



NG
REPLACE STEERING ACTUATOR ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← C1593/53 Actuator Standard Position Malfunction (Sep 2011 – Dec 2011)C1595/55 Lost Communication with Steering Angle Sensor Module (+ C15C4/68) (Sep 2011 – Dec 2011) →