CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Sep 2011
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) (w/ REMOTE FUNCTION) |
- NOTICE:
- When the customer requests a change in a function, first make sure the function(s) can be customized.
- Be sure to make note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure the function(s) can be customized.
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Turn the intelligent tester on.
Enter the following menus: Utility / Customize Setting / Power Window.
Select the setting by referring to the table below.
Power Window Display (Item)
Default
Contents
Setting
Door Key P/W Up
OFF
Function that raises all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec.
ON/OFF
Door Key P/W Down
OFF
Function that lowers all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 sec.
ON/OFF
P/W Up W/ Transmit
OFF
Function that raises all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.
ON/OFF
P/W Down W/ Transmit
OFF
Function that lowers all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.
ON/OFF
P/W Up W/ Smart
OFF
Function that raises all the power windows when, with the ignition switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec.
ON/OFF