2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL BACK-UP LIGHT BULB
  1. Install the back-up light bulb to the back-up light socket plug.


2. INSTALL BACK-UP LIGHT SOCKET PLUG

  1. E234128
    Turn the back-up light socket plug in the direction indicated by the arrow in the illustration to install the back-up light socket plug.


3. INSTALL BACK-UP LIGHT ASSEMBLY LH
  1. Attach the claw to install the back-up light assembly LH.

  1. Install the 2 nuts.


4. INSTALL REAR BUMPER COVER
(Click here)
← REMOVAL (from Sep 2011)COMPONENTS (Sep 2011 – Dec 2011) →