2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR BUMPER COVER
(Click here)

2. REMOVE BACK-UP LIGHT ASSEMBLY LH

  1. E234678
    Remove the 2 nuts.

  1. Detach the claw and remove the back-up light assembly LH.


3. REMOVE BACK-UP LIGHT SOCKET PLUG

  1. E234127
    Turn the back up light socket plug in the direction indicated by the arrow in the illustration and remove the back up light socket plug.


4. REMOVE BACK-UP LIGHT BULB
  1. Remove the back-up light bulb from the back-up light socket plug.

← COMPONENTS (from Sep 2011)INSTALLATION (from Sep 2011) →