Cellular Phone Registration Failure, Phonebook Transfer Failure
Circuit diagnosis · Vehicles built from Jan 2012
INSPECTION PROCEDURE
| 1. CHECK OPERATION |
Place the cellular phone close to the multi-media module receiver assembly.
Check if the cellular phone can be registered.
- OK:
- The cellular phone can be registered.
|
|
||||
| OK | ||
| ||
| 2. CHECK CURRENT CONDITIONS |
Proceed to the next step according to the table below.
Result Result
Proceed to
Another "Bluetooth" compatible cellular phone is available.
A
Another "Bluetooth" compatible vehicle is available.
B
None of the above.
C
|
|
||||
|
|
||||
| A | |
| 3. CHECK USING ANOTHER CELLULAR PHONE |
Check if the system functions using another "Bluetooth" compatible cellular phone.
- HINT:
- Confirm that either the same or a different version of another "Bluetooth" compatible cellular phone complies with the system.
- Depending on the version, some "Bluetooth" compatible cellular phones cannot be used.
- Confirm that either the same or a different version of another "Bluetooth" compatible cellular phone complies with the system.
- OK:
- The system functions.
|
|
||||
| OK | ||
| ||
| 4. CHECK USING ANOTHER "Bluetooth" COMPATIBLE VEHICLE |
Register the cellular phone with another vehicle and check if the system functions normally.
- HINT:
- Depending on the version, some "Bluetooth" compatible cellular phones cannot be used.
- OK:
- The system functions.
|
|
||||
| OK | ||
| ||
| 5. CHECK CELLULAR PHONE |
Check if a call can be made from the cellular phone.
- HINT:
- The cellular phone is unable to call under any of the following conditions:
- The cellular phone is locked.
- The phonebook is being transferred.
- The line is crossed.
- The cellular phone is outside service range.
- The power is off.
- The battery is low.
- The cellular phone is not connected via "Bluetooth".
- The cellular phone is locked.
- OK:
- A call can be made from the cellular phone.
|
|
||||
| OK | ||
| ||
