2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE CENTER BACK DOOR GARNISH

  1. B181326
    Detach the 5 clips and 2 claws, and remove the back door garnish.


2. REMOVE BACK DOOR SIDE GARNISH LH

  1. B181327
    Detach the 3 clips and remove the back door side garnish.


3. REMOVE BACK DOOR SIDE GARNISH RH

HINT:
Use the same procedures described for the LH side.


4. REMOVE ASSIST GRIP (for Face to Face Seat Type)

  1. B188374
    Remove the 2 screws and assist grip.


5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

  1. B186428
    Using a screwdriver, detach the 4 claws and remove the back door service hole cover.

  1. Disconnect connector.


6. REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

  1. B186429
    Detach the 2 claws and remove the power back door main switch.


7. REMOVE BACK DOOR GARNISH

B181329
  1. Using a screwdriver, detach the 14 clips and remove the back door garnish.

    HINT:
    Tape the screwdriver tip before use.


8. REMOVE REAR WIPER ARM

  1. B181332
    Open the cover.

  1. Remove the nut and rear wiper arm.


9. REMOVE REAR WIPER MOTOR GROMMET

  1. E156014
    Detach the wiper motor grommet.


10. REMOVE REAR WIPER MOTOR ASSEMBLY

  1. B181333
    Disconnect the connector.

  1. Remove the 3 bolts and rear wiper motor assembly.

← COMPONENTS (from Sep 2011)REMOVAL (from Jan 2012) →