2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE CENTER BACK DOOR GARNISH

  1. B313300
    Detach the 5 clips and 4 claws, and remove the center back door garnish.


2. REMOVE BACK DOOR SIDE GARNISH LH

  1. B313301
    Detach the 3 clips and 2 claws, and remove the back door side garnish LH.


3. REMOVE BACK DOOR SIDE GARNISH RH
  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.

  1. B313302
    w/ Power Back Door:

    1. Detach the clip and 4 claws, and remove the back door side garnish RH.


4. REMOVE ASSIST GRIP (for Face to Face Seat Type)

  1. B188374
    Remove the 2 screws and assist grip.


5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

  1. B186428
    Using a screwdriver, detach the 4 claws and remove the No. 2 back door service hole cover.

  1. Disconnect connector.


6. REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

  1. B186429
    Detach the 2 claws and remove the door opening switch sub-assembly.


7. REMOVE BACK DOOR GARNISH

  1. B181329
    Using a screwdriver, detach the 14 clips and remove the back door garnish.

    HINT:
    Tape the screwdriver tip before use.


8. REMOVE REAR WIPER ARM

  1. B181332
    Open the cover.

  1. Remove the nut and rear wiper arm.


9. REMOVE REAR WIPER MOTOR GROMMET

  1. E156014
    Detach the rear wiper motor grommet.


10. REMOVE REAR WIPER MOTOR ASSEMBLY

  1. B181333
    Disconnect the connector.

  1. Remove the 3 bolts and rear wiper motor assembly.

← REMOVAL (Sep 2011 – Dec 2011)INSPECTION (from Sep 2011) →