REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1.
REMOVE REAR WIPER BLADE |
 |
- Raise the rear wiper blade to the position shown in the illustration until the meshing of the claw disengages with a clicking sound.
- NOTICE:
- Be careful not to break the claw.
Pull the rear wiper blade straight away from the wiper arm toward the left side of the vehicle.
- NOTICE:
- Do not bend the rear wiper arm with the rear wiper blade removed, as the arm tip could damage the windshield surface.
| 2.
REMOVE REAR WIPER RUBBER |
 |
- Pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration and remove it.
- NOTICE:
- Do not pull out the wiper rubber forcibly. Otherwise, the backing plates will be deformed or the blade claw will be damaged.
- HINT:
- Pushing the rubber as shown in the illustration will allow it to be removed more easily.
Remove the 2 wiper rubber backing plates from the wiper rubber.