2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Illumination for Panel Switch does not Come on with Tail Switch ON

Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

INSPECTION PROCEDURE


1. INSPECT NIGHTTIME ILLUMINATION
  1. Turn on the light control switch and check the nighttime illumination of the vehicle interior.

    Result 
    Result
    Proceed to
    Only radio receiver or steering pad switch nighttime illumination does not activate
    A
    No nighttime illumination at all
    B



B
GO TO LIGHTING SYSTEM (Click here)
A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Tape is Tangled due to Incorrect Tape Speed or Auto-Reverse Malfunction (from Sep 2011)Illumination for Panel Switch does not Come on with Tail Switch ON (from Jan 2012) →