2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Tape is Tangled due to Incorrect Tape Speed or Auto-Reverse Malfunction

Circuit diagnosis · Vehicles built from Sep 2011

INSPECTION PROCEDURE


1. CHECK FOR FOREIGN OBJECT
  1. Check for any foreign objects.

    1. Check that no foreign objects or defects are detected in the cassette tape player of the radio receiver assembly.

      OK:
      No foreign objects or defects are detected.



NG
REMOVE FOREIGN OBJECT
OK


2. REPLACE CASSETTE TAPE
  1. Replace the cassette tape with another one and recheck.

    1. Replace the cassette tape with another normal one (90 minutes or less) to see if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
Go to step 3
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)

3. CLEAN HEAD

  1. E119304E04
    Head cleaning
    1. Raise the cassette door with your finger. Using a pencil or similar object, push in the guide.

    2. Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.

  1. Check if the same trouble occurs again.

    OK:
    Malfunction disappears.

    Text in Illustration 
    *1
    Capstan
    *2
    Head
    *3
    Pinch Roller



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END


← Sound Quality is Bad Only when Playing Tape (from Sep 2011)Illumination for Panel Switch does not Come on with Tail Switch ON (Sep 2011 – Dec 2011) →