The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
INSPECTION PROCEDURE
| 1. CHECK CELLULAR PHONE |
Check if the voice on the other side can be heard using a cellular phone.
- OK:
- Voice can be heard.
|
|
||||
| OK | |
| 2. CHECK NAVIGATION SYSTEM |
Check that navigation sound can be heard from the driver side speaker.
- OK:
- Sound can be heard from the audio system.
|
|
||||
| OK | |
| 3. CHECK SETTINGS |
Check if the volume level is set to low on the "Call" screen.

- OK:
- The level is not set low.
|
|
||||
| OK | |
| 4. CHECK SETTINGS (OPERATION CHECK) |
Enter the "Hands-free Volume Setting" screen. Refer to Check Hands-free Volume Setting in Operation Check (Click here).

Check if the receive voice level is set to "0".
- HINT:
- The receive voice level can be set to 11 different levels, -5 to +5, with a 3 dB difference.
Check if the receive voice level is set to the minimum or maximum level.
- HINT:
- When the receive voice level is set to the minimum or maximum level, the sound may be distorted.
- NOTICE:
- "Voice Quality Type" should not be changed.
- OK:
- The receive voice level is set to "0".
|
|
||||
| OK | ||
| ||
