INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL REAR HEADER SPEAKER ASSEMBLY |
 |
- Connect the connector.
Install the rear header speaker assembly with the 3 screws.
| 2.
INSTALL BACK DOOR TRIM PANEL ASSEMBLY
|
 |
- Attach the 16 clips to install the back door trim panel.
Install the 4 bolts.
| 3.
INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)
|
 |
Attach the 2 claws to install the door opening switch sub-assembly.
| 4.
INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)
|
 |
- Connect the connector.
Attach the 4 claws to install service hole cover.
| 5.
INSTALL ASSIST GRIP (for Face to Face Seat Type)
|
 |
- Install the assist grip with the 2 screws.
| 6.
INSTALL BACK DOOR SIDE GARNISH RH
|
 |
- HINT:
- Use the same procedures described for the LH side.
| 7.
INSTALL BACK DOOR SIDE GARNISH LH
|
 |
- Attach the 3 clips to install the back door side garnish.
| 8.
INSTALL CENTER BACK DOOR GARNISH
|
 |
- Attach the 5 clips and 2 claws to install the back door garnish.
| 9.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).