2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL REAR HEADER SPEAKER ASSEMBLY

  1. B181526
    Connect the connector.

  1. Install the rear header speaker assembly with the 3 screws.


2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY
  1. Attach the 16 clips to install the back door trim panel assembly.

  1. Install the 4 bolts.


3. INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)
  1. Attach the 2 claws to install the door opening switch sub-assembly.


4. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)
  1. Connect the connector.

  1. Attach the 4 claws to install the No. 2 back door service hole cover.


5. INSTALL ASSIST GRIP (for Face to Face Seat Type)
  1. Install the assist grip with the 2 screws.


6. INSTALL BACK DOOR SIDE GARNISH RH
  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.

  1. w/ Power Back Door:

    1. Attach the clip and 4 claws to install the back door side garnish RH.


7. INSTALL BACK DOOR SIDE GARNISH LH
  1. Attach the 3 clips and 2 claws to install the back door side garnish LH.


8. INSTALL CENTER BACK DOOR GARNISH
  1. Attach the 5 clips and 4 claws to install the center back door garnish.


9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →