2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT CLUTCH SWITCH ASSEMBLY

B184278E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Pushed (On)
    Below 1 Ω
    1 - 2
    Not pushed (Off)
    10 kΩ or higher

    If the result is not as specified, replace the clutch switch assembly.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →